Overview
TS10A is a Portable color difference meter developed by 3nh using its own spectroscopic core technology. It belongs to the high-level color difference meter under the spectroscopic architecture. It can not only ensure the accurate relative color difference value Delta E, but also ensure the long-term accuracy of the absolute values L, A, B, which can be measured by international and national standards at any time. The instrument adopts a built-in silicon photodiode array (double column 24 groups) sensor and an imported whiteboard. Repeatability Delta E * ab can be easily controlled within 0.1, taking into account Measurement speed and operation convenience. It can quickly make color difference measurement judgments without connecting to a computer. Its 8mm measurement caliber is suitable for precision color difference control in the production and quality inspection of plastic electronics, paints inks, Spinning & weaving garment printing, printing, ceramics and other industries.
Features
8 mm measurement diameter, 10 ° observer angle, to meet the needs of most industries;
2. Adopt combined full-light spectrum LED Illuminant, planar grating splitting, true color capacitive Touchscreen, with high configuration starting point;
3, silicon photodiode array (dual 24 groups) sensor, display accuracy 0.01, Repeatability is good;
4. Illuminant life is more than 3 million measurements for 5 years, lithium battery can make 6000 measurements within 8 hours, long battery life and can be recharged repeatedly;
5. Large data storage capacity, 500 master standards and 10,000 samples, easy to quickly find, analyze and compare data;
6. Ergonomic design, smooth appearance, comfortable grip, suitable for continuous inspection work.
7. Adopt full-band Balanced LED Illuminant to ensure sufficient Light spectrum distribution and measurement accuracy in the visible range;
8, Using innovative ETC real-time calibrating technology, built-in standard whiteboard to ensure Reliability and Repeatability of each test;
9. Measurement verification reports are provided for each instrument, and measurement data can be Traceability to the National Measurement Institute to ensure data credibility.
Principle
The TS10A color difference meter adopts D/8 (diffuse illumination, 8 ° direction reception) illumination mode, which conforms to the relevant Optical inspection measurement standards. Its core Working Principle is: the combined full-spectrum LED Illuminant emits rays of light, which are analyzed by a planar grating spectroscopic system into Light spectrum and irradiated to the surface of the sample. The reflected light is received by a silicon photodiode array (dual column 24 group) sensor and converted into an electrical signal. The instrument calculates the Color coordinates (such as CIE LAB, XYZ, Yxy, LCh) and reflectance of the sample by analyzing the Light spectrum data in the 400~ 700nm Wavelength range. The innovative ETC real-time calibrating technology ensures that the Optical inspection system is calibrated by the built-in standard whiteboard before each measurement, thus ensuring the accuracy and Repeatability of the measurement results.
Applications
Plastic electronics, paints inks, Spinning & weaving garment printing, printing, ceramics
Standards
CIE No.15、GB/T 3978、GB 2893、GB/T 18833、ISO7724-1、ASTM E1164、DIN5033 Teil7
Steps
1. Turn it on and ensure that the instrument has sufficient power.
2. According to the measurement requirements, select the corresponding Measurement mode (such as single measurement or average measurement) through the Capacitive Touchscreen.
3, the use of stabilizer positioning, the instrument measurement port (φ 8mm) smoothly aligned with the surface of the sample to be tested.
4. Trigger the measurement, and after about 1.5 seconds, you can view the chromatic value, color difference value/picture, qualified/unqualified result, Color simulation and other information of the sample on the screen.
The measurement data will be automatically stored, and users can find and analyze historical data through the instrument (500 master standards, 10,000 samples).
6. After the measurement is completed, it can be turned off or standby, and the instrument supports charging through USB.
Notice
• Do not use the instrument outside the operating environment range (0~ 40 ℃, 0~ 85% RH, no condensation, altitude below 2000m).
When storing, avoid extreme environments (-20~ 50 ℃, 0~ 85% RH, no condensation).
• When measuring, make sure that the measurement port is closely attached to the surface of the sample to avoid light leakage affecting the results.
• The standard whiteboard built into the instrument should be kept clean and wiped when dirty, but avoid the use of corrosion solvents.
• Please use the original charger to charge the lithium battery to ensure Battery life and safety.
• The USB interface of the instrument is only used for charging and does not support connecting quality control software for data transmission.
• Avoid severe vibration or impact of the instrument to prevent damage to the internal Optical inspection components.
• Regularly validate the instrument according to the provided Measurement verification report to ensure the long-term accuracy of the measurement data.
