Overview
TS7010A is a 3nh use of independent spectroscopic core technology research and development of Portable color difference meter, is a high-level color difference meter under the spectroscopic architecture, in addition to ensuring accurate relative value Delta E at the same time, but also to ensure the absolute value L, A, B long-term accuracy, anytime and anywhere by international standards and national standards Measurement. Using built-in silicon photodiode array (dual row 24 groups) sensor, imported whiteboard, Repeatability Delta E * ab easily controlled within 0.1, while taking into account the convenience of Measurement speed and operation, no computer or software can be quickly connected to the color difference measurement judgment, 8mm measurement diameter to meet the plastic electronics, paints inks, Spinning & weaving garment printing and dyeing, printing, ceramics and other industries in the production and quality inspection of accurate color difference control.
Features
8 mm measurement diameter, 10 ° observer angle, can meet the needs of most industry customers;
2. Combination of Full Light spectrum LED Illuminant, Planar Grating Spectroscopic, True Color Capacitive Touchscreen, High starting point configuration;
3, silicon photodiode array (dual 24 groups), display accuracy 0.1, Repeatability is good;
4. Illuminant life 5 years is greater than 3 million measurements, lithium battery 6000 measurements within 8 hours, can be recharged repeatedly and has a long battery life;
5. Data storage master standard 500, sample 10000, fast data search, analysis and comparison;
6. Ergonomic design, beautiful appearance, comfortable grip, suitable for continuous inspection work.
7. Adopt full-band Balanced LED Illuminant to ensure sufficient Light spectrum distribution in the visible range to ensure Measurement speed and accuracy of results;
8. Using Silicon Photodiode Array (Dual 24 Array) Sensor to Ensure Measurement speed, Accuracy, Stability and conformity;
9. Traceability of measurement data to the National Institute of Measurement to ensure the credibility of test data;
10. Adopt imported standard whiteboard and innovative ETC real-time calibrating technology to ensure long-term accuracy and Repeatability of the instrument.
Principle
The TS7010A color difference meter adopts D/8 (diffuse illumination, 8 ° direction reception) illumination mode, which complies with relevant international and national standards. The instrument uses a combined full-spectrum LED Illuminant to illuminate the sample, splits the reflected light through a plane grating, and receives the Light spectrum information in the 400~ 700nm Wavelength range by a silicon photodiode array (24 groups in two columns) Sensor, and calculates the Color data of the sample. The instrument has a built-in standard whiteboard and adopts ETC real-time calibrating technology to calibrate each measurement to ensure the accuracy and Repeatability of the measurement results.
Applications
Plastic electronics, paints inks, Spinning & weaving garment printing, printing, ceramics
Standards
CIE No.15、GB/T 3978、GB 2893、GB/T 18833、ISO7724-1、ASTM E1164、DIN5033 Teil7
Steps
1. Boot preparation: ensure that the instrument has sufficient power and is used in a suitable operating environment.
2. Calibrate: The instrument adopts ETC real-time calibrate technology, which will be automatically calibrated before each test or according to the prompts.
3. Measurement mode: Select single measurement or average measurement (2~ 99 times) as needed.
4. Positioning measurement: Use the stabilizer at the bottom of the instrument to locate and stick the φ 8mm measurement diameter to the surface of the sample to be tested.
5. Trigger measurement: Press the measurement button for measurement, and the result can be read on the screen after about 1.5 seconds.
6. View and analysis: The screen can display reflectance, sample chromatic value, color difference value/graph, qualified/unqualified results, Color simulation, Color bias and other information.
7. Data management: measurement data can be automatically stored (500 master standards, 10,000 samples), and data can be searched, analyzed and compared through instruments.
Notice
• Please use the instrument in the specified operating environment (0~ 40 ℃, 0~ 85% RH, no condensation, altitude below 2000m).
• Do not store the instrument for a long time outside the storage environment (-20~ 50 ℃, 0~ 85% RH, no condensation).
• When measuring, please ensure that the measurement diameter (φ 8mm) is closely attached to the surface of the sample to avoid light leakage affecting the measurement results.
• Please use the calibrated whiteboard matched with the instrument or approved for maintenance, keep the whiteboard clean, and wipe the dirt with a soft cloth.
• The instrument has a built-in lithium battery, please follow the instructions to charge to maintain Battery life and measurement life.
• Instrument Interface USB is only used for charging, does not support connecting quality control software, please use Bluetooth ® 5.0 function for data transmission.
• Avoid strong vibration or impact on the instrument to prevent damage to the internal Optical inspection components.
• Regularly check the performance of the instrument to ensure that its measurement Repeatability and accuracy meet the requirements (e.g. chromatic value Repeatability Delta E * ab is within 0.1).
