Overview
YL4660 Colorimeter is a non-contact Color measuring instrument using D/8 (Diffuse illumination, 8 ° direction reception, SCI including specular reflection) standard. The test Probe and the tested sample are non-contact testing to achieve non-contact precision color measurement of liquids, sauces, powders, etc. Its unique innovative design not only provides non-contact measurement solutions directly from the production online, but also guarantees stable and High Accuracy measurement results. During the measurement process, the sample will not be touched, preventing damage to the sample and avoiding cross-contamination.
Features
1. According to the actual height of the tested object, the measurement head can be moved up and down and the height of the test sample can be stored
2, TFT True Color 7inch Capacitive Touchscreen; Concave Grating
3. 256-pixel dual-array CMOS image sensor
4. Wavelength range 400~ 700nm, 10nm output
5. Illuminant for Full Light spectrum LED Illuminant, UV Illuminant
6. Measurement modes: quality control mode, sample mode, continuous statistics mode, etc. to meet more customer needs
7. Large-capacity storage space, sample mode + quality control mode 30,000 continuous statistical mode 10,000
8. Built-in camera viewing and positioning
9. PC-side software has powerful expansion capabilities
Principle
YL4660 uses D/8 (diffuse illumination, 8 ° direction reception, SCI includes specular reflected light) standard, through non-contact measurement Color, using full Light spectrum LED Illuminant and UV Illuminant lighting, concave grating splitting, 256 pixel dual array CMOS image sensor receiving signal, precision color measurement in the 400~ 700nm Wavelength range.
Applications
Color accurate analysis and transmission in laboratory, R & D industry, accurate Color measurement in automated production line, Color quality control, cosmetics, fruits and vegetables, food, plastic electronics, paints inks, printing, ceramics
Standards
CIE No.15、GB/T 3978、GB 2893、GB/T 18833、ISO7724-1、ASTM E1164、DIN5033 Teil7
Steps
1. Adjust the measurement head position according to the actual height of the measured object
2. View and locate through the built-in camera
3. Measurement mode (sample mode, quality control mode, continuous statistics mode)
4. Perform a single or average measurement
5. View measurement results and store data
Notice
• Ensure non-contact distance of 7.5mm (+/- 0.2mm) during measurement process
• The sample height should be within the range of 0~ 160mm (using the original support baseplate)
• Operating Ambient Temperature should be 0~ 40 ℃, Humidity 0~ 85% RH (no condensation)
• Storage Ambient Temperature should be -20~ 50 ℃, Humidity 0~ 85% RH (no condensation)
• The altitude should be less than 2000m
• Power supply with DC 24V, 3A Power Adapter
