The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
Measuring temperature 90 ℃ and the error is only +/- 1 ℃, the melting state can be observed at a distance, directly pasted and used to visually display the overheating of the equipment.
Immediate Temperature Response with Irreversible Color Changing Technology, Measurement accuracy +/- 1 ° C to +/- 4 ° C, Resistant to Oil, Water and Steam, Provides Long-term Temperature Record for Easy Paste and Preservation.
Adopt irreversible color changing technology, accuracy +/- 1-4 ° C, oil and water resistance and steam resistance, provide four-grid temperature monitoring, size 23x45mm, 10 sheets each, easy to record temperature history for a long time.
The melting temperature error is only +/- 1 ° C, allowing for remote observation of the melting state. It can be directly pasted without complex installation and is suitable for temperature monitoring of a variety of electrical equipment.
The melting temperature error is only +/- 1 ° C, allowing for remote observation of the melting state. It can be directly pasted and used without complicated operation, and is suitable for temperature monitoring of various electrical equipment.
Irreversible discoloration design to ensure permanent preservation of temperature records, 85 ° C accurate temperature measurement point with 2x2cm circular patch, Pressure sensitive adhesive layer to achieve firm paste and its own protective film to enhance durability
Irreversible Color change for long-term temperature recording; Resistant to oil, water and steam; Temperature accuracy is +/- 1 ° C below 100 ° C and +/- 1.5 ° C from 100 ° C to 154 ° C; Self-adhesive design for easy use and storage.
The mechanical compression spring device is not easy to damage, the accuracy is up to 0.5HW, the film thickness 0.4-6 mm workpiece can be detected, and various Hardness values such as Brinell Rockwell can be obtained through the conversion table.
With five Illuminant system, Color temperature coverage 2700K to 6500K, no need to warm up without flashing, automatic switching Illuminant and display the use time, low energy consumption without heating, support Metamerism function.
With a unique discoloration temperature function, it can achieve white, red, and black color changes, with a rated temperature of 75 ° C, with stickers for easy pasting, and can record temperature change history.
Precise control of ink layer thickness, the minimum Basis Weight unit is 0.01CC, and the usage of Spot Color inks is predicted by calculation, which is suitable for ink contrast and color concentration detection.
Three-color discoloration technology implementation of white to red and then to black reversible change, Temperature Measurement range 65 ℃ to 75 ℃, with over-temperature warning and temperature history function, size 25 * 38mm easy to install.
With unique discoloration and digital display function, it can change white to red, red to black three Color changes, temperature monitoring range of 75 ℃, can record over temperature history, with its own sticker for easy installation and use.
Adopting three-color reversible discoloration technology, when the temperature reaches 75 ° C, it turns from white to red, and turns black when it falls back to record the over-temperature history. The size is 25 * 21mm, with stickers for easy installation, and the repeability can be used to monitor temperature changes.
