Instantaneous Response Time Less than 6 seconds warm-up, can detect 3 g/year Sensitivity halogen refrigerant, 405 g lightweight design with 5 hours continuous Working time, with automatic warm-up and two-color LED charge indication function.
Measurement principle of cold mirror to eliminate system inertia error, accuracy of +/- 0.2 ° C, built-in electronic flowMeter to monitor 15-60L/h gas flow, system stability without repeability calibration.
Frequency range 20KHz to 100KHz, Sensitivity indicated by LED and sound, weight of only 140 grams for portable, suitable for a variety of gas and air leak detection scenarios.
Using Infrared NDIR Detection Principle, Range 0-100ppm, Response Time ≤ 30S, Flameproof Structure and Various Signal Outputs, Support Remote Monitoring and Intelligent Sensor Technology, Ensure High Accuracy and Stability.
It can detect halogen gas leaks of less than 0.5 ounces per year, with an instantaneous Response Time and a Warm-Up Time of less than 90 seconds. It features automatic warm-up and battery protection, and a portable design weighing only 480 grams.
Glass-lined, FRP, epoxy coal asphalt coatings of different thicknesses can be mass tested by high voltage detection technology. When the coatings have defects such as pinholing and bubbles, the instrument will emit bright sparks and sound and light alarms.
Adopting high voltage detection technology, it can sensitively find defects such as coating pinholing and bubbles, equipped with sound and light alarm system, and powered by nickel battery, which is convenient for field operation.
Using 32-bit microprocessor and 24-bit ADC chip, support 1-6 Sensor expansion, with 4-20mA, RS485 and relay output, Protection Rating IP65, suitable for gas monitoring in harsh environments.
Measurement range 3μg to 150mg, quick results in one minute, automatic electrolysis current control and thermal printing function.
MCU chip to achieve low power consumption operation, Response Time ≤ 30 seconds, detection error ≤ +/- 3% F.S. Support 4-20mA, RS485 and wireless signal output, can be operated by remote control without opening the lid, with sound and light alarm and intelligent Sensor detection technology.
Detect NH3 gas, range 0~ 100ppm, resolution 0.1ppm, Response Time T90 ≤ 120s, support sound and light alarm, Operating temperature -10~ 50 ℃, Working time for more than 60 hours, Portable design weighs only 170 grams.
Using infrared NDIR detection principle, range 0~ 2% Vol, resolution up to 0.001, Response Time ≤ 30 seconds, support a variety of signal output and remote alarm, Sensor life up to 10 years.
32-Bit microprocessor and 24-bit ADC chip, equipped with 2.4-inch high definition screen, support 1-6 Sensors and a variety of output modes, with automatic recovery and anti-corrosion function, Response Time T90 ≤ 20s, resolution 0.01ppm.
Using 40KHz Frequency and 640KHz crystal time base circuit, the weight is only 50 grams and easy to carry, which can accurately detect air leakage sources in various environments.
Equipped with 2.4-inch high definition color screen, supports up to 6 Sensor expansions, with 4-20mA and RS485 output, Response Time ≤ 20 seconds, Protection Rating IP65, suitable for harsh industrial environments.
