Using laser scattering technology, a single measurement can simultaneously display up to five particle size particulate matter (PM) concentrations, Sensitivity of 0.001 mg/m ³, no need to replace the cutting head, support continuous monitoring and Data storage functions.
Using laser scattering technology, one measurement simultaneously displays five particle size data, detection range 0.01-100 mg/m ³, Sensitivity up to 0.01mg/m ³, no need to replace the cutting head, support continuous monitoring and Data storage functions.
Using laser light scattering technology, Measurement range 0.01-100 mg/m ³, accuracy of 0.001mg/m ³, with self-calibration system and air curtain Shielding function, support a variety of particle size measurement and continuous monitoring.
Using laser light scattering technology, direct reading mass concentration, 1 minute results, Measurement range 0.01-100 mg/m ³, with self-calibration system and air curtain Shielding function, to ensure that the Optical inspection system is clean, support a variety of particle size measurement.
With six-channel particle size detection and 2.83L/min Sampling flow rate, using laser Illuminant life of over 30,000 hours, support UCL calculation and Built-in Printer, AC-DC dual-use can work continuously for more than 6 hours.
Using laser scattering technology, the detection sensitivity is 0.01mg/m ³, the Measurement range is 0.01~ 100 mg/m ³, with self-cleaning and clean gas Shielding functions, and supports a variety of cutters and timing sampling modes.
With six-channel particle size detection capability, Sampling flow rate 2.83L/min, using long-life laser Illuminant to ensure Stability, built-in thermal printer and support AC and DC power supply, can work continuously for more than 6 hours.
Using laser scattering technology, Sensitivity up to 0.001mg/m ³, Measurement range 0.001~ 10mg/m ³, with self-cleaning and filter sampling functions, support a variety of cutter options, to achieve rapid continuous monitoring.
100L/min Sampling flow rate and six particle size channel detection, equipped with long life laser Illuminant and imported air pump, support Touchscreen operation and USB data export function.
With six particle size channel detection capability, sampling capacity of 2.83L/min, built-in lithium battery supports 6 hours of continuous operation, using semiconductor laser Illuminant and color Touchscreen design.
Measurement range 0.5-3000 μm, maximum resolution 0.1μm, support more than 30 image analysis functions, Particle size distribution and morphology analysis.
Using light scattering principle to detect 0.3-10 μ m particle size, Sampling flow rate 28.3L/min, built-in lithium battery supports 6 hours of work, can directly save data to U disk, equipped with thermal printer for on-site output.
Using 50L/min Sampling flow rate and six particle size channel synchronous detection, equipped with semiconductor laser Illuminant and Touchscreen control, built-in thermal printer supports real-time data output, Continuous Operating Time up to 5 hours.
The image method is used to analyze the particle morphology and particle size, the test range is 1~ 3500 μ m, the system magnification is 4000 times, the automatic segmentation success rate exceeds 93%, and paraMeters such as length-diaMeter ratio and sphericity can be counted.
Featuring a stainless steel frame suitable for dry, wet, and manual sieving, with a pore size of 250μm, laser engraving provides clear labeling to ensure full traceability.
