Using positive pressure test principle, Measurement range 0~ 1.6MPa, fully automatic operation, support three test modes, built-in calibrating program, suitable for quantitative measurement of various sealing performance indicators.
The fully automatic electronically controlled hydraulic pump provides smooth and continuous pulling force with +/- 1% accuracy, built-in rechargeable battery supports 200 tests, and IP65 Protection Rating ensures durability.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
Adopt all directions swing vibration mode to ensure that the paint is fully mixed, Vibration Frequency 550 times/min, equipped with 0-15 minute timing function, suitable for 80-240mm barrel height range.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Pneumatic fixture to achieve automatic clamping, no manual operation; Measurement range covers 10~ 16000mN, support a variety of sheet material Tear strength detection, equipped with 3.2 inch LCD display and thermal printer.
Fully enclosed metal Furnace body to enhance Baseline Stability, with imported alloy Sensor to enhance corrosion resistance; Temperature range covering room temperature to 600 ℃, support 0.1~ 100 ℃/min program temperature control, with 0.001 ℃ resolution and Automatic calibration function.
Featuring a Cotex-M4 ARM processor, it employs pneumatic sample clamping and an integrated weighing mechanism to achieve fully automated measurement. The oscillation frequency is adjustable from 50 to 200 times per minute, with a weighing resolution of up to 0.001g.
Adopt 0-3000rpm stepless speed regulation, Processing capacity 10-100L, with full explosion-proof structure and hand lifting system, suitable for dispersing and mixing of high viscosity materials.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
Using 7-inch true color Touchscreen and 32-bit microprocessor, Temperature range RT +~ 400 ℃, with automatic atmospheric pressure compensation and over-temperature protection function, the test process is fully automated.
Adopt a new generation of High Accuracy Sensor to ensure stable and reliable weighing, with a reaction time of less than 2 seconds, a fully automatic internal calibration function triggered by time and temperature, and support for a variety of weighing units.
Using three-axis automatic precision control, the maximum cutting section of 200 * 150mm, with intelligent cutting function can change the amount of feed according to the hardness of materials, fully enclosed structure to ensure safe operation, mobile magnetic filtrate circulating water Tank to improve the cutting mass.
With a wide range of 0-2800rpm speed regulation and 250mm automatic lifting Travel, the dual-axis constant force system is used to achieve smooth lifting, and the integrated sand disc and dispersion disc meet a variety of process requirements.
Touchscreen operation, intuitive display, with frequency setting, digital display and automatic stop function, the liquid storage cylinder can adjust the dripping speed according to the national standard requirements, suitable for performance evaluation of various film composite treatment surfaces.
