Special design container to ensure measurement conformity, suitable for color scheme, suitable for fine powder particle measurement, effectively avoid the influence of powder tightness and surface Smoothness.
Can test flowability, Angle of Peace and Loose Bulk Density, equipped with 30ml stainless steel measuringflask and double powder plate, funnel diaMeter can be selected 5mm or 2.5mm, for precise control of powder mass.
Double pulse Back flushing automatic powder cleaning, Laminating filter accuracy of 0.3 microns, powder gas separation efficiency, stainless steel material is durable, color change operation is simple, improve dust recovery efficiency.
Using fixed funnel method to measure powder flowability, equipped with 10mm inner through Glass funnel and 0-100mm scale struts, can accurately measure cone height, meet the requirements of Pharmacopoeia and ISO standards.
Standard funnel method for metal powder flowability measurement, equipped with 2.5mm and 5mm pore diaMeter stainless steel funnel, can accurately measure 50g powder flow time to +/- 0.01s, suitable for powder testing such as cemented carbide.
With a speed of up to 30000rpm and a processing viscosity of 10000mPas, the claw-type high-shear structure and interchangeable stator and rotor provide triple safety protection and continuous 6-speed regulation, ensuring efficient dispersion and durability.
The ultra-small design is easy to carry, the automatic zero stabilization function does not need to be calibrated, the moisture-proof process adapts to the harsh environment, the Measurement range is 0~ 199.9, the accuracy is 0.1, and the use of a No. 5 battery can work continuously for more than 50 hours.
The stainless steel funnel is used to ensure that the surface is smooth and free of static electricity. It is equipped with two specifications of funnel, which are suitable for free-flowing powder and caking trend powder respectively. The receiver volume is 500ml, and the sampling volume is 510-550ml, which meets the standard test requirements.
Speed up to 30000rpm, the maximum processing viscosity of 10000mPa.s, the use of claw high shear head structure and triple safety protection, can quickly homogenize tissue samples, stator and rotor interchangeable cost savings.
Four 25 ° inclined quartz Glass baffles are used to guide the powder flow and are equipped with a 25 +/- 0.05ml standard cylindrical Cup to achieve a loose powder state through natural gravity, ensuring the accuracy and Repeatability of density testing.
Using high temperature dry heat technology, temperature control accuracy of +/- 1 ℃, rapid heating and over-temperature protection function, studio volume 70L, easy and safe operation.
The injection limited bottom surface method is used to directly measure the angle of repose, the funnel taper is 60 ° +/- 0.5 °, and the outflow diaMeter is 5mm, which is suitable for powder flowability analysis of different particle sizes and shapes.
High-performance motor running smooth and low noise, with CPU digital display dynamic Rotation speed control, can realize timing fixed speed operation, Processing capacity 10-100L, lifting Travel 600mm, support a variety of mixing forms simple replacement.
360 ° tumbling structure combined with planetary disk swirl/spin, maximum Processing capacity 16L, support dry and wet grinding vacuum grinding, can reach 0.1 μm discharge particle size, with a variety of ball mill Tank material and grinding mode selection.
Constant pressure ensures uniform sampling, suitable for a variety of powder material testing, implementation of GB9087-88 and other standards, improve sampling accuracy and conformity.
