CATEGORIES

    Ferric Ion Concentration ColoriMeter

    Overview Products Knowledge Standards Terms
    The iron ion concentration colorimeter works by reacting a chromogenic agent with iron ions to form a colored compound, and the concentration is determined based on the depth of the color. It is used to detect iron content in water quality, coatings, and inks. During operation, the sample is mixed with the reagent and placed into the instrument for reading.
    Selection
    When selecting, consider a measurement range that covers common iron ion concentrations, ensure the instrument's accuracy meets detection requirements, and opt for a user-friendly interface. Prioritize models with strong anti-interference capabilities to adapt to different sample matrices, and ensure maintenance costs align with the laboratory's routine budget.
    type

    Terms

    Iron-Cobalt Colorimeter
    Platinum-Cobalt Colorimeter

    Standards

    Active GB/T 18856.2-2008
    Test methods for coal water mixture - Part 2: Determination of mass percentage of solid
    Active GB/T 35804-2018
    Rubber, vulcanized or thermoplastic－Resistance to ozone cracking－Test methods for determining the ozone concentration in laboratory test chambers
    Active GB/T 6324.6-2014
    Test method of organic chemical products—Part 6: Determination of color for liquids—Tristimulus colorimetry
    Active GB/T 32387-2015
    Color assessment booth
    Active GB/T 39560.702-2021
    Determination of certain substances in electrical and electronic products—Part 7-2:Hexavalent chrome—Determination of hexavalent chrome[Cr(VI)]in polymers and electronics by the colormetric method
    Active GB/T 39193-2020
    Ambient air—Determination of particulate matter mass concentration—Gravimetric method
    Active GB/T 2423.33-2021
    Environmental testing—Part 2: Test methods—Test Kca: High concentration sulfur dioxid
    Active GB/T 20216-2016
    Pulp and paper—Determination of the effective residual ink concentration (ERIC number)—Infrared reflectance measurement
    Active GB/T 5399-2004
    Pulps--Determination of stock concentration
    Active GB/T 9761-2008
    Paints and varnishes - Visual comparison of the colour of paints

    Instruments

    BANTE A131-Cn laboratory ion Meter precision Ion concentration water hardness measuring device
    BANTE A131-Cn laboratory ion Meter precision Ion concentration water hardness measuring device

    Equipped with 7-inch TFT display, supports 5 ion Measuring methods, automatically recognizes ion selective ElectRode, can store 1000 sets of data, Measurement accuracy of +/- 1% F. S, suitable for a variety of Ion concentration detection.

    $ 864.00
    BANTE A131-CL laboratory ion Meter precision Ion concentration water hardness measuring device
    BANTE A131-CL laboratory ion Meter precision Ion concentration water hardness measuring device

    Equipped with 7-inch TFT display, supports 5 ion Measuring methods, automatically recognizes ion selective ElectRode, can store 1000 sets of data, Measurement accuracy of +/- 0.5% F. S, suitable for a variety of Ion concentration detection.

    $ 864.00
    BANTE A131-Br Laboratory ion Meter Ion concentration Hardness measurement
    BANTE A131-Br Laboratory ion Meter Ion concentration Hardness measurement

    Equipped with 7-inch TFT display, supports 5 ion Measuring methods, automatically recognizes ElectRode, Measurement accuracy +/- 0.5% F.S., can store 1000 sets of data, suitable for a variety of Ion concentration detection.

    $ 864.00
    BANTE A131-Ca laboratory ion Meter precision Ion concentration water hardness measuring device
    BANTE A131-Ca laboratory ion Meter precision Ion concentration water hardness measuring device

    Equipped with 7-inch TFT display, supports 5 ion Measuring methods and a variety of concentration units, automatically recognizes ion selective ElectRode, can store 1000 sets of data, Measurement range 5 × 10~ 1M.

    $ 864.00
    BANTE A131-Na laboratory ion Meter precision Ion concentration measurement 7 inch TFT screen
    BANTE A131-Na laboratory ion Meter precision Ion concentration measurement 7 inch TFT screen

    Equipped with 7-inch TFT display, supports 5 ion Measuring methods, Measurement accuracy +/- 0.5% F. S, automatic identification of ion selective ElectRode, can store 1000 sets of data, provide a variety of concentration unit selection.

    $ 864.00
    BANTE ION-Na standard solution, sodium ion standard solution concentration 1000ppm
    BANTE ION-Na standard solution, sodium ion standard solution concentration 1000ppm

    The general ion standard solution concentration is 1000ppm, using PTFE solution bottle Encasement, size 190 × 65mm, 500g per bottle, suitable for daily ion calibrating.

    $ 135.00
    BANTE ION-Cu standard solution, ion standard solution, copper ion 1000ppm
    BANTE ION-Cu standard solution, ion standard solution, copper ion 1000ppm

    Concentration 1000ppm of copper ion standard solution, PTFE bottle Encasement, capacity 480mL, suitable for daily ion calibrating applications.

    $ 135.00
    BANTE A131-Ag laboratory ion Meter precision Ion concentration water Hardness Tester
    BANTE A131-Ag laboratory ion Meter precision Ion concentration water Hardness Tester

    Equipped with 7-inch TFT display, supports 5 ion Measuring methods, automatically recognizes ion selective ElectRode, expands memory to store 1000 sets of data, Measurement accuracy of +/- 1% F.S.

    $ 864.00
    BANTE ION-Br standard liquid, ion standard liquid Bromine ion 1000ppm
    BANTE ION-Br standard liquid, ion standard liquid Bromine ion 1000ppm

    Universal ion standard solution concentration 1000ppm, suitable for daily ion calibrating, PTFE bottle Encasement, capacity 480mL, to ensure calibrating accuracy and Stability.

    $ 135.00
    LEICI type II, Conventional concentration Ammonia Gas sensing electRode Ion strength regulator, Ammonia gas sensitive Ammonium ion composite ElectRode
    LEICI type II, Conventional concentration Ammonia Gas sensing electRode Ion strength regulator, Ammonia gas sensitive Ammonium ion composite ElectRode

    250Ml Encasement Specification for Ammonia Gas Sensitive and Ammonium Ion Composite ElectRode, provides routine concentration adjustment for measurement accuracy and Stability.

    $ 127.00
    BANTE A131-K laboratory ion Meter precision Ion concentration water hardness measuring device
    BANTE A131-K laboratory ion Meter precision Ion concentration water hardness measuring device

    Equipped with 7-inch TFT display, supports 5 ion Measuring methods and 13 optional paraMeters, Measurement accuracy +/- 1% F. S, automatically recognizes ion ElectRode and stores 1000 sets of data, with calibrated reminder and USB Communication interface.

    $ 864.00
    HANNA HI718 PhotoMeter, Iodine TintoMeter Ion concentration measurement
    HANNA HI718 PhotoMeter, Iodine TintoMeter Ion concentration measurement

    Measurement range 0.0~ 12.5 ppm, accuracy +/- 0.1 ppm +/- 5% of reading, fast and easy Ion concentration detection based on DPD method.

    $ 215.00
    BANTE A131-NH4 laboratory ion Meter precision Ion concentration water hardness measuring device
    BANTE A131-NH4 laboratory ion Meter precision Ion concentration water hardness measuring device

    Equipped with 7-inch TFT display, supports 5 ion Measuring methods and 2 to 5 point calibrating, automatically recognizes ion selective ElectRode, can store 1000 sets of data, Measurement accuracy of +/- 0.5% F.S.

    $ 864.00
    QIWEI DWS-51 sodium ion concentration Meter, high purity water sodium ion content measurement instrument
    QIWEI DWS-51 sodium ion concentration Meter, high purity water sodium ion content measurement instrument

    Measurement range 0.23 nm g/L to 23 g/L, temperature compensation 5~ 50 ℃, suitable for high purity water and industrial drainage sodium ion concentration determination, repeatability error does not exceed 0.03pNa.

    $ 262.00
    BANTE ION-NH4 standard solution, ionic standard solution, general 1000ppm concentration
    BANTE ION-NH4 standard solution, ionic standard solution, general 1000ppm concentration

    The general ion standard solution concentration is 1000ppm, using PTFE solution bottle Encasement, size 190 × 65mm, 500g per bottle, suitable for daily calibrating needs.

    $ 135.00

    Articles

    How to choose a turbidimeter - starting with the measurement principle.
    This article introduces how to select a turbidimeter, starting from the measurement principles. The main principles include the scattered light method, transmitted light method, and scattering-transmission ratio method, each suitable for samples with different concentrations.
    Abbe refractometer measures the relationship between refractive index and concentration of liquid coating resins.
    This article introduces the method of measuring the refractive index of liquid coating resins using an Abbe refractometer and calculating the concentration based on the relationship between refractive index and concentration.
    The necessity of a standard light source box in visual color comparison and color difference assessment of coatings.
    In the production of coatings, accurate color evaluation is crucial. Visual color comparison is easily affected by light, as natural light is unstable, and different lighting conditions can make colors appear different.
    UV spectrophotometer for measuring residual monomers in polymer solutions.
    This article introduces a method for determining residual monomers in polymer solutions using ultraviolet spectrophotometry. The principle relies on the characteristic absorption of monomers in the ultraviolet region, calculating their content based on the relationship between absorbance and concentration.
    Abbe refractometer measures the refractive index and concentration of resin liquids.
    The Abbe refractometer measures the refractive index of resin liquids using the principle of the critical angle of light, and there is a corresponding relationship between the refractive index and concentration within a certain range.
    Visual color comparison method using colorimetric tubes to determine the color phase of varnish.
    Colorimetric tube visual colorimetry is a method used to determine the color hue tendency of varnish samples by directly comparing them with a standard color scale using the human eye. During operation, samples and standard liquid columns should be prepared using colorimetric tubes of consistent specifications under standard lighting conditions, and the hue differences should be observed in parallel.
    Determination of free amino acid content in protein solutions using a microtitration apparatus.
    This article introduces a method for determining the free amino acid content in protein solutions using a microtiter plate reader. It is based on the ninhydrin color reaction, where amino acids react with the reagent under specific conditions to produce colored compounds, and the concentration is calculated by measuring the absorbance.
    Operating Specifications for the Determination of Hexavalent Chromium Content in Wastewater Using Colorimetric Titration Apparatus
    This article introduces the standard operating procedure for determining hexavalent chromium content in wastewater using a colorimetric titrator. The method is based on the reaction between hexavalent chromium and diphenylcarbazide under acidic conditions to form a purplish-red complex, with the titration endpoint determined by monitoring changes in absorbance at a wavelength of 540 nanometers.
    Selection Basis for Karl Fischer Titration: Volumetric vs. Coulometric Methods
    There are two methods for Karl Fischer moisture titrators: volumetric and coulometric. The volumetric method calculates moisture by measuring the volume of a reagent with a known concentration that is consumed, making it suitable for samples with higher moisture content, such as those in the range of a few thousandths or more.
    Automatic potentiometric titration method for determining hydrogen peroxide concentration by redox method
    This article introduces a method for determining the concentration of hydrogen peroxide using an automatic potentiometric titrator. It is based on the redox reaction between potassium permanganate and hydrogen peroxide under acidic conditions, with the titration endpoint automatically determined by the abrupt change in potential.
    Application of Valley Beater in Pulp Laboratory Beating
    The Valley beater is a device used in laboratories to simulate industrial beating processes. It modifies the morphology of pulp fibers through mechanical action, thereby influencing paper properties. During operation, parameters such as beating pressure, pulp consistency, and beating time must be controlled, with the beating degree serving as a quantitative measure of the effect.
    Conductivity meter detects ion impurity content in coatings.
    This article introduces the method of using a conductivity meter to detect the content of ionic impurities in coatings. The principle involves measuring the conductivity of the coating solution to indirectly assess the total amount of ionic impurities, as conductivity is related to ion concentration. The detection steps include sample preparation, instrument calibration, measurement, and data analysis.
    Standardized ink color evaluation environment for visual color comparison cabinets
    This article introduces the standardized application of visual color comparison boxes in ink color evaluation. It emphasizes that to ensure the accuracy and consistency of color judgments, the evaluation environment must be strictly controlled.
    The role of a reflection densitometer in controlling printing ink concentration.
    The reflection densitometer measures the light reflectance of the ink layer and converts it into a density value, thereby objectively reflecting the thickness and concentration of the ink layer. In printing, it is used to monitor solid density, ensuring stable ink supply, replacing subjective judgment, and enabling data-driven control.
    UV-Vis Spectrophotometer Measures Ink Pigment Concentration
    This article introduces the method of measuring the concentration of ink pigments using a UV-Vis spectrophotometer. The principle is based on the Lambert-Beer law, which calculates the concentration by measuring the absorbance of the pigment solution at specific wavelengths.