Adopt 4mm small diaMeter design, suitable for surface or small area measurement; Repeatability Delta E * ab < 0.05 to ensure Measurement accuracy; Horizontal structure is small in size, comfortable and stable to hold.
Frequency 7MHz, Probe diaMeter 6mm, can be measured thin-walled and small arc surface, minimum pipe diaMeter Φ 15mm, Measurement range 0.75-80 mm, suitable for different environmental conditions.
Using 5MHZ Frequency and 14mm diaMeter design, support 3.0~ 200mm steel material measurement, minimum pipe diaMeter 30mm, suitable for high temperature environment, temperature measurement range of 450 ℃, to ensure accurate thickness detection.
Adopt 4mm small diaMeter design, equipped with dual positioning system and new integrating sphere optical path, measurement Stability up to Delta E * ab 0.08, support dual measurement end face switching, built-in rechargeable lithium battery lasting.
Suitable for 300 ℃ high temperature material thickness measurement, range 2.0~ 100mm, diaMeter 14mm, minimum diaMeter 30mm, 5MHz Frequency to achieve accurate measurement.
Measurement beam of light diaMeter 1.5mm, measurement window 4mmx2mm, suitable for facet and small curvature surface measurement, low energy consumption single battery can last for more than 58 hours.
Frequency 10MHz, Measurement range 0.65~ 20mm, suitable for thin-walled and small curved surface workpieces, the lower limit of pipe measurement Φ 10 * 1.0mm.
Provide an additional one-year warranty period, which is applicable to Coating thickness Gauge pRoducts. It needs to be purchased simultaneously when purchasing the equipment and is not sold separately.
Dedicated to Coating thickness Gauge calibrating, ensure accurate thickness measurement, suitable for F type equipment, improve Reliability.
Mechanical design for measurement on any surface, using hardened stainless steel, measurement disc diaMeter 50mm, thickness 11mm, equipped with aluminum free swirl/spin rollers, reading accuracy +/- 2μm.
Measurement range of 3.0-600 mm with 2MHz Frequency and 22mm diaMeter design, high penetration capability, suitable for thickness detection of a variety of good conductor materials.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
Impact energy 3N, Impact device mass 75g, suitable for measurement of small or thin specimens and surface hardening layer, the minimum thickness can be measured 1mm and the minimum hardening layer depth 0.2mm.
Measurement range 0~ 625μm with resolution of 0.1μm, suitable for accurate measurement of small parts and near edge areas.
Using 7.5MHz High Frequency Probe, Measurement range 0.7~ 50mm, suitable for thin-walled and small arc surface workpieces, the lower limit of pipe measurement is Φ 25 * 1.2mm, strong adaptability.
