The eccentric spherical shaft structure is used to ensure uniform mixing, and the 2800RPM speed is fixed to achieve fast vortex mixing. The TPU material countertop is wear-resistant and corrosion-resistant, and the Protection Rating reaches IP21, which is suitable for long-term stable operation.
The eccentric spherical shaft structure ensures uniform mixing, the fixed Rotation speed is 2800rpm to provide stable oscillation, the TPU material table is resistant to corrosion and wear, supports two operating Modes of pointing and continuous, and the volume is small and the noise is low.
The single-arm double-column structure is equipped with an electric lifting device, with a drop height range of 300-1500mm, a test load of 0-80kg, and a buffer device to improve service life and stability. The height error does not exceed 2%.
Fixed speed 2800RPM, eccentric spherical shaft design to ensure uniform mixing; TPU material work surface wear-resistant and corrosion-resistant, suitable for a variety of testtube specifications; compact size and low power consumption, suitable for long-term high-speed work.
Rotation speed 2800RPM, eccentric spherical shaft design and TPU wear-resistant table, support point and continuous blending mode, small size and low noise, suitable for liquid, liquid-solid and powder rapid and uniform mixing.
Horizontal airflow design ensures cleanliness, ISO5 cleanliness level and 0.2~ 0.5m/s wind speed provide a stable environment, forward tilting operation surface and double side perspective windows enhance comfort and vision.
Using 12 stainless steel shaft Rods with a diaMeter of 2-32mm, the 50mm wide test plate can be tested for 180 ° bending. The coating cracking situation is detected by decreasing the diaMeter of the shaft Rod, and the operation is simple and fast.
The single-arm double-column structure is used to realize the free drop of the face corner, and the height tracking system is equipped to make the drop height error not exceed 2%. The buffer device improves the service life and safety of the equipment.
Equipped with 8 kinds of diaMeter shaft Rods from 2 to 12mm, the 180 degree bending test can be completed in 1-3 seconds, and the anti-cracking performance of the paint film can be evaluated with the smallest shaft Rod diaMeter, which is easy to operate.
Driven by DC brushless motor, Speed range 500~ 2500rpm, can process 50 samples at a time, with soft start function to avoid sample splashing, support point and timing two operation modes.
Tapered shaft size Φ 3.1~ 38mm, shaft Rod size 2-32mm, anodic oxidation aluminum and stainless steel material, ergonomic design clamping device, bending arm large knob for easy operation, suitable for measuring plate thickness ≤ 0.8mm.
Double-sided horizontal mounting design can accommodate 40 centrifuge tubes simultaneously, compatible with 1.5ml and 2.0ml specifications, suitable for swirl/spin Mixer for efficient Sample Handling.
Equipped with 13 shaft diaMeters from 2 to 32mm, it can accurately determine the cracking performance of coatings; support 1.0mm thickness sample testing, manual operation to ensure smooth and controllable bending process, meeting standard laboratory Environmental requirements.
The bending diaMeter of putty film cracking peeling is tested by bending test plate, and the shaft Rod size is 50mm and 100mm. It is suitable for 0.2-0 mm thick tinplate substrate, and the operation is simple and reliable.
Driven by DC brushless motor, Speed range 500-2500rpm, can process up to 50 samples at the same time. With soft start function to avoid sample splashing, support two operation modes of pointing and timing, LED real-time display running status.
