Using Industrial Sensor, Response Time is less than 30 seconds, accuracy +/- 3% FS, with explosion-proof structure and multi-Gas detection ability, to ensure stable and reliable gas concentration monitoring.
Built-in three measurement units can simultaneously detect pH, Conductivity Detector and dissolved oxygen, support automatic temperature compensation and ElectRode diagnosis, with IP54 Protection Rating, data storage capacity of 500 groups, support GLP specification to achieve data traceability.
Explosion-proof enclosure design ensures stable operation in harsh environments, can simultaneously monitor multiple particle size dust concentration without changing the cutter, Measurement range 0.01-100 mg/m ³, built-in protective gas curtain to prevent Optical inspection system contamination.
It can detect 1-5 gases simultaneously, supports automatic range switching and four concentration unit conversion. Using 32-bit processor and 24-bit ADC chip, the detection accuracy ≤ +/- 2%, equipped with powerful air pump and IP65 Protection Rating, suitable for harsh environments.
Using Industrial Sensor, Response Time is less than 30 seconds, accuracy is up to +/- 3% FS, with explosion-proof and explosion-proof structure, support multi-Gas detection and sound and light alarm function, power consumption is only 3W.
High Accuracy Sensor for Multi-ParaMeter simultaneous measurement, Measurement speed up to 0.4 seconds, temperature error +/- 0.5 ℃, with backlight display and automatic shutdown function, portable design for on-site rapid detection.
Measurement range up to 320μm, support Multi-ParaMeter such as Ra, Rz, etc., with automatic range switching and real-time waveform display function, Continuous Operating Time over 20 hours.
Combined ElectRode can simultaneously measure pH, conductivity, TDS, salinity and temperature, support one-button switching paraMeters; Conductivity Detector ElectRode platinum black to reduce Polarization effect, accuracy of +/- 0.01pH; with automatic temperature compensation and IP67 dustproof and waterproof design.
Adopt DSP chip to realize fast data processing, support Multi-ParaMeter measurement such as Ra, Rz, etc., equipped with TYPE C and Bluetooth interface for data transmission, Continuous Operating Time exceeds 20 hours, and stores 100 sets of data.
With pH/ORP/Temperature Multi-ParaMeter monitoring, Adjustable peristaltic pump Flow rate 0.5-3 L/h, Support automatic temperature compensation and dose consent function, Data recording interval of 10 seconds can be stored for 60 days.
Integrate 8 water quality paraMeter measurement functions, support automatic temperature compensation and calibrated reminders, equipped with 500 sets of data storage capacity, and adopt multi-mode power supply scheme to ensure long-term outdoor use.
It can simultaneously read up to 8 water quality parameters, equipped with a 9000mAh large-capacity battery, supports Sensor address modification and temperature, zero point, slope calibrating, which is convenient for long-term operation and Facility Management on site.
With explosion-proof IP66 Protection Rating, support -40~ 55 ℃ wide temperature work. Using high definition color screen visual distance of 10 Meters, support multi-signal output and remote paraMeter configuration, built-in relay can control peripheral equipment, with zero automatic correction and a variety of alarm functions.
Pump suction sampling, Response Time T90 ≤ 20 seconds, detection accuracy ≤ +/- 3%, support 1-4 Sensor expansion, with dust Filter to adapt to harsh occasions.
7-Inch high-resolution Touchscreen supports three-paraMeter same-screen display, with 1500 sets of data storage capacity and IP54 Protection Rating, supports automatic temperature compensation and multi-mode Adjustment, Operating interface can switch between Chinese and English.
