The equipment temperature range -50~ 750 ℃, object distance ratio 12:1, Response Time 500ms, with non-contact measurement, High Accuracy and Fast Response characteristics, suitable for a variety of industrial scenarios.
With CAL Check ™ boot Self-check function, temperature measurement accuracy of +/- 0.2 ℃, using penetrating AISI 316 stainless steel Probe, IP65 waterproof, suitable for semi-solid and frozen material temperature measurement.
Equipped with Infrared Sensor and Thermal Probe Dual Measurement mode, Response Time is only 1 second, Optical inspection coefficient is 3:1, support -40~ 150 ℃ wide range temperature measurement, to meet the needs of accurate temperature detection in different scenarios.
Using penetrating AISI 316 stainless steel Probe, temperature range -50.0~ 220 ℃, accuracy +/- 0.2 ℃, with boot Self-check function, easy to clean and suitable for semi-solid and frozen materials.
With penetrating AISI 316 stainless steel Probe, easy to clean and insert semi-solid pRoducts. With CAL Check ™ boot self-check function, temperature accuracy of +/- 0.2 ℃, Measurement range covering -50.0~ 220 ℃.
Imported high-luminance Illuminant and narrow-band filter system, Optical inspection stability ≤ 0.002A/20min, measurement range 0.01~ 1.00mg/L, support users to calibrate Linear dispersion, good corrosion resistance of the host case.
Imported high-luminance Illuminant and narrowband filter system, Optical inspection stability ≤ 0.002A/20min, measurement range 0.01~ 0.50mg/L, equipped with large-screen LCD Chinese display, support long-term data storage and user self-calibration.
Imported high-luminance Illuminant and stable Optical inspection system, with repeatability ≤ 2%, intrinsic error +/- 3% (F. S), equipped with large-screen LCD and power-off data recording function.
The temperature measurement range covers -18 to 1350 ° C, the object distance ratio is 20:1, and the Response Time is 500ms. It can safely and accurately measure the surface temperature of difficult-to-contact objects, and the structure is compact and easy to operate.
Imported high-luminance Illuminant, Optical inspection stability ≤ 0.002A/20min, equipped with narrow-band filter system anti-interference, large-screen Chinese display, support users to calibrate Linear dispersion, host anti-corrosion.
Optical inspection system with dual beam of light feedback compensates for Illuminant fluctuation in real time, Light spectrum reflectance Repeatability Standard Deviation is less than 0.1%, and the inter-device difference Delta E * ab is as high as 0.08, which can accurately measure fluorescent materials without UV correction.
Using diffuse transmission optical path design, optical density Measurement range 0.00-6 OD, light transmitance accuracy +/- 2%, can simultaneously measure light transmitance, absolute optical density, relative optical density and Dot area ratio.
Foldable stainless steel probe design, temperature range -49.9~ 49.9 ℃, Accuracy up to +/- 0.5 ℃, equipped with large LCD display and Fahrenheit switching function, easy to high temperature liquid safety measurement.
Adopt cold Illuminant narrow-band interference Optical inspection system, Optical inspection stability is less than 0.002A/20min, support room temperature to 180 ℃ stepless temperature control, anti-chlorine interference up to 2000mg/L, batch processing of 20 water samples, easy to operate without changing pipes.
Temperature measurement range 200~ 1850 ℃, object distance ratio 80:1, Response wavelength 900~ 1700nm, support Data storage and USB connection, suitable for long-distance accurate measurement.
