Ion Chromatography Ultrapure Water System

The ion chromatography ultrapure water system removes ionic impurities from water through multi-stage filtration and purification techniques, including steps such as reverse osmosis, ion exchange, and ultrafiltration. This equipment provides ultrapure water that meets the requirements for ion chromatography analysis in laboratories, preventing interference from waterborne ions in test results. It is applied in water quality analysis for fields such as environmental monitoring and food safety.
Selection
When selecting an ion chromatography ultrapure water system, it is essential to ensure that the produced water has a resistivity of 18.2 MΩ·cm and a total organic carbon (TOC) content below 5 ppb. Consider whether the purification technology combination includes RO, EDI, and UV oxidation. Determine the water storage capacity based on the daily average water usage, and check the replacement cycle and cost of consumables. Confirm that the equipment is made of sanitary-grade plastic to avoid contamination.

Terms

Instruments

The water pRoduction rate reaches 5L/h, the eight-stage purification system includes reverse osmosis (RO) membrane and ultra-pure polishing column, the desalination and sterilization rate is over 99%, supports intelligent control and a variety of water intake modes, suitable for laboratory environment use.

$ 3543.00

Equipped with 7-inch TFT display, supports 5 ion Measuring methods, automatically recognizes ion selective ElectRode, Measurement accuracy +/- 1% F.S., can store 1000 sets of data, suitable for a variety of Ion concentration and water Hardness detection.

$ 864.00

Suitable for ultra-low conductivity water sample measurement, Glass grinder liquid interface design, pH Measurement range 0-11, Temperature range 0-80 ℃, support can add liquid reference solution.

$ 273.00

The water pRoduction rate is 10L/h, and the eight-stage purification system includes reverse osmosis (RO) membrane and ultra-pure polishing column, providing 18.25MΩ. cm ultra-pure water quality, supporting multiple water intake modes and intelligent control functions.

$ 4027.00

Equipped with 7-inch TFT display, supports 5 ion Measuring methods, automatically recognizes ion selective ElectRode, can store 1000 sets of data, Measurement accuracy of +/- 1% F. S, suitable for a variety of Ion concentration detection.

$ 864.00

Equipped with 7-inch TFT display, supports 5 ion Measuring methods, automatically recognizes ion selective ElectRode, can store 1000 sets of data, Measurement accuracy of +/- 0.5% F. S, suitable for a variety of Ion concentration detection.

$ 864.00

Equipped with 7-inch TFT display, supports 5 ion Measuring methods and 2 to 5 point calibrating, automatically recognizes ion selective ElectRode, can store 1000 sets of data, Measurement accuracy of +/- 0.5% F.S.

$ 864.00

Equipped with 7-inch TFT display, supports 5 ion Measuring methods, automatically recognizes ion selective ElectRode, expands memory to store 1000 sets of data, Measurement accuracy of +/- 1% F.S.

$ 864.00

With 80L/H water pRoduction capacity and 18.2MΩ · cm ultra-pure water quality, it supports regular automatic circulation and consumable life monitoring. It can disinfect and display three-way water quality with one click, prolong the service life of the ultra-pure water bag, and achieve efficient online monitoring.

$ 2834.00

Equipped with 7-inch TFT display, supports 5 ion Measuring methods and a variety of concentration units, automatically recognizes ion selective ElectRode, can store 1000 sets of data, Measurement range 5 × 10~ 1M.

$ 864.00

Equipped with 7-inch TFT display, supports 5 ion Measuring methods and 13 optional paraMeters, Measurement accuracy +/- 1% F. S, automatically recognizes ion ElectRode and stores 1000 sets of data, with calibrated reminder and USB Communication interface.

$ 864.00

General ion standard solution concentration 1000ppm, suitable for daily ion calibrating, PTFE solution bottle Encasement, capacity 480mL, water Hardness type.

$ 135.00

Measurement range 0.23 nm g/L to 23 g/L, temperature compensation 5~ 50 ℃, suitable for high purity water and industrial drainage sodium ion concentration determination, repeatability error does not exceed 0.03pNa.

$ 262.00

7-Inch TFT display clearly displays data, supports 5 Measuring methods such as direct reading method and known addition method, automatically recognizes ion selective ElectRode, expands memory to store 1000 sets of data, Measurement accuracy +/- 0.5% F.S.

$ 864.00

Equipped with 7-inch TFT display, supports 5 measuring methods such as direct reading method and known addition method, Measurement range 1 × 10-6~ 0.1M, accuracy +/- 1% F.S., automatic identification of ion selective ElectRode, can store 1000 sets of data.

$ 864.00

Articles