Measurement range 0-100 ° SR, equipped with a special measuringflask to directly display the Freeness/Schopper-Riegler value, without conversion, the test water temperature is controlled at 20 +/- 0.5 ° C to ensure accurate and reliable detection results.
Measurement range 0~ 100 ° SR, cone rising speed 100 +/- 10mm/s, suitable for all kinds of Pulp suspensions, can use raw materials economically and end the Refining process in time, simple and reliable operation.
Measurement range 1~ 100 ° SR, sealing cone rising speed 100 +/- 10mm/s, Pulp suspension filtration rate was determined according to Schopper-Riegler method.
Measurement range 0~ 100 ° SR, overflow discharge time 149 +/- 1s, using national standard design, can accurately detect Pulp suspension filtration rate.
Manual compression sealing vertebral body design, three-legged leveling mechanism to ensure sealing, Measurement range 0~ 100 ° SR, cone rising speed 100 +/- 10mm/s, overflow port discharge time 149 +/- 1s.
Measurement range 0~ 100 ° SR, overflow discharge time 149 +/- 1 seconds, cone rising speed 100 +/- 10mm/s, used to detect Pulp suspension filtration rate, in line with ISO 5267-1 international standards.
Vertical design, motor and drying system separation, small vibration, low noise, high dehydrating efficiency, Rotation speed of 2800 rpm, dehydrating weight 0-500g, accurate timing, easy to use.
It can measure the range of 0-1000CSF, with an accuracy of 10CSF, using 304 stainless steel material and silicone sealing ring structure, with self-Adjustment, suitable for various Pulp water filtration change detection.
Using electronic technology and LCD screen, impeller rotation frequency 49 +/- 1.5S-1, motor power 370W, wet dissociation pulp to maintain the original fiber structure, easy to operate.
Made of stainless steel, with a pulp diaMeter of 50mm and a Rod length of 500mm, it is suitable for medium and low viscosity mixing. Medium and high speed operation provides efficient mixing effect.
Adopting 1000-5000rpm variable frequency speed regulation technology, equipped with 370W motor and 3L capacity container, it can achieve efficient dissociation without destroying the fiber structure, meeting the processing requirements of different Pulp samples.
Manually pressing the sealing cone and adjusting the rising speed with the heavy hammer, the spring pre-tightening mechanism enhances the sealing performance, the Measurement range is 1~ 100 ° SR, and the discharge time of the overflow port is 149 +/- 1 second.
Measurement range 0-4mm, resolution 0.001mm, contact pressure 100 +/- 10kPa, contact area 2 +/- 0.05cm ², automatic reciprocating motion to complete thickness measurement.
Measurement range 0-4mm, contact pressure 100kPa, equipped with dial indicator mechanism, can achieve accurate thickness detection, suitable for a variety of sheet materials.
Measurement range 0~ 1000ml/min, pressure difference 0.1~ 2.0kpa, stainless steel end cap and pure copper valve anti-corrosion structure, built-in fixture to avoid rubber pad peeling, suitable for a variety of materials Air Permeability accurate test.
