Measurement range of 3.0-600 mm with 2MHz Frequency and 22mm diaMeter design, high penetration capability, suitable for thickness detection of a variety of good conductor materials.
With coating penetration measurement capability, resolution up to 0.01mm, Measurement range 0.65-400 mm, support Probe automatic identification and zero calibrate, provide standard and MIN Minimum two Measurement modes.
Measurement range 0-1000N penetration resistance, detection depth of 30 cm can be extended to 1.5 Meters, without the ring knife method can quickly obtain dry density data, complete the detection within 10 minutes.
Support 0 °, 10 °, 30 ° multi-angle test, equipped with 250mL liquid discharge funnel and 500mL measuringflask, can meet the needs of sanitary napkins and diapers at the same time, such as slippery penetration, re-penetration and other penetration performance measurement.
Echo-echo technology implementation of 0.15mm ultra-thin part measurement, resolution of 0.001mm, can penetrate 0.5mm coating measurement substrate Film thickness, support sound speed calibrated and difference mode settings.
Provide an additional one-year warranty period, which is applicable to Coating thickness Gauge pRoducts. It needs to be purchased simultaneously when purchasing the equipment and is not sold separately.
Dedicated to Coating thickness Gauge calibrating, ensure accurate thickness measurement, suitable for F type equipment, improve Reliability.
Equipped with emission-echo and echo-echo two thickness measurement modes, can penetrate the coating measurement substrate thickness; Measurement range 0.65~ 600mm, accuracy +/- 0.05mm; Support Probe automatic identification and zero point calibrating.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
Using 3.5mm Probe and 10mm insertion depth, Measurement range 0.5~ 15.0kgf/cm ², with average calculation, MAX Maximum latch function, support USB, RS-232 and Bluetooth Data output methods.
Temperature range -50 to 300 ° C, Response Time of only 4 seconds, equipped with replaceable ultra-fast Response stainless steel penetration Probe, with CAL Check ™ Adjustment and battery error prevention system to ensure accurate and reliable measurement.
The penetration method is used for testing, a set of tests only takes 15-20 minutes, the measurement depth is 0-30cm, the accuracy is less than or equal to 0.25%, and there is no radioactive pollution.
With paint penetration measurement ability, accurate measurement of wall thickness without removing coatings, thickness range 2.5~ 125mm, accuracy +/- 0.03mm, support multi-echo and single-echo mode switching, suitable for detection needs of different surface conditions.
Measurement accuracy with professional calibrating services for quality control and equipment maintenance, purchased with Coating thickness Gauge.
High Accuracy timing chip to achieve +/- 0.05mm accuracy, support single and double crystal probe to cover ultra-thin to conventional workpiece measurement, with automatic gain adjustment and coating penetration function, Operating temperature range -10~ 50 ℃.
