Laser Sensor is used to directly measure the natural vibration Frequency of the belt, combined with the input belt mass and free length to calculate the tension, Measurement range 10Hz~ 500Hz, split Sensor size can penetrate into 66mm narrow space, support Metric Imperial Unit switch.
Adopting stainless steel shell, the belt is equipped with a sink to collect grinding materials, the belt adjustment device can adjust the tightness, Rotation speed 1400rpm, Power 0.55kW, easy operation and maintenance.
Laser Sensor is used to directly measure the natural vibration Frequency of the belt. Measurement range is 10Hz~ 800Hz. The size of the split Probe is only 124 * 21 * 12mm. It can penetrate into a small space of 66mm and supports metric and imperial Unit switching.
Laser Sensor is used to directly measure the natural vibration frequency of the belt. Measurement range is 10-800Hz. The split probe size is 124 * 21 * 12mm and can penetrate into a small space of 66mm. It supports metric and imperial unit switching.
Laser Sensor is used to directly measure the natural vibration frequency of the belt. The size of the split probe is only 124 * 21 * 12mm, which can penetrate into the depth of 66mm. Measurement range is 10-500Hz, and it supports metric and imperial unit switching.
Measurement frequency up to 680Hz with accuracy in the range of +/- 1Hz to +/- 1%, suitable for transmission system vibration detection.
Real-time display of tension value and accompanied by sound and light indication, no need to continuously observe the screen; automatic storage of upper and lower limits and calibrated data, power failure is not lost; Measurement range 0-750N, accuracy +/- 5%, support a variety of unit conversion.
Using quartz time base technology to ensure accurate measurement, Maximum Measured value 750N, Real-time display of tension data and support for voice prompts, automatic storage of upper and lower limit setting values, providing USB, RS-232 and Bluetooth Data output methods.
Adopt horizontal three-roller extrusion grinding, roller clearance hand adjustment, maximum processing viscosity 3000000cps, roller can be cooled down water temperature control, fineness control precision, suitable for a variety of viscosity materials.
Equipped with a servo motor and a synchronous belt reduction mechanism, it ensures smooth transmission and low noise. It features a touchscreen operation and real-time LCD display, offering stable and reliable performance with protection functions such as overcurrent, overvoltage, and overload.
Adopt servo motor and synchronous belt deceleration mechanism, force value Precision +/- 1%, speed range 0.1-500 mm/min, transmission smooth and low noise, Operating interface is LCD screen display, support tensile compression test.
Complete 64 Sample Handling in 1 minute, use vertical oscillation to ensure Stability, noise is lower than 55dB, support dry grinding, wet grinding and low temperature grinding, suitable for a variety of specifications grinding tube.
Rotation speed 86rpm, disc diaMeter 240mm, weight of about 7.32kg four pieces of adjustable pressure, double transmission to ensure that the number of revolutions is accurate, concave socket design for easy replacement of grinding, strong anti-interference and foot shock absorption anti-skid.
Complete 48 Sample Handling within 1 minute, adopt fully enclosed design to avoid cross-contamination, support 0-70Hz homogenization speed and low temperature grinding mode, and the noise is lower than 55dB to ensure a quiet experimental environment.
The surface of the three rollers is squeezed and rubbed at different speeds to achieve grinding. The roller is made of cold hard alloy steel, with a surface Hardness of HS70 ° or more, a fineness of grinding up to 15μm, and a capacity of 350Kg/h.
