Foldable stainless steel probe design, temperature range -49.9~ 49.9 ℃, Accuracy up to +/- 0.5 ℃, equipped with large LCD display and Fahrenheit switching function, easy to high temperature liquid safety measurement.
Adopt magnetic Induction principle to measure 0-3000μm Film thickness, equipped with wear-resistant Ruby Probe and IP65 Protection Rating, Probe with LED status indicator light, support electronic calibrated certificate.
Magnetic surface temperature measurement Probe through strong magnetic adsorption on the workpiece, small volume and light mass, Sensor and magnet insulation to ensure measurement accuracy, the highest temperature 480 ℃, especially suitable for circular workpiece surface.
Built-in Probe design, surface temperature Measurement range -40~ 80 ℃, air temperature accuracy +/- 0.5 ℃, Humidity range 0~ 100% RH, providing stable and reliable dew point monitoring.
The Portable design is equipped with a 3.5mm Probe, Measurement range 0.2 to 5.0 kgf/cm ², supports average calculation and MAX Maximum latching, and can output data via USB, RS-232 or Bluetooth.
The ring 6mm Probe design ensures good contact with the workpiece surface, the Teflon jacket is easy to clean and flexible and durable, the maximum temperature resistance is 300 ° C, and the lightweight shape avoids affecting the measurement accuracy.
Equipped with needle Probe for direct insertion measurement, the range covers -50 to 300 ° C, the accuracy reaches +/- 1 ° C, Repeatability +/- 1% or +/- 1 ° C, and it is small and lightweight only 60g.
Using 5MHZ Frequency and 10mm diaMeter Probe design, Measurement range 1.2-230 mm, the minimum pipe diaMeter can be measured Φ 20mm × 3mm, suitable for thickness detection in room temperature environment.
Polarography design, equipped with PTFE membrane can be quickly replaced, integrated temperature sensor to achieve temperature compensation, suitable for BOD testing, long probe shaft can be directly loaded into the BOD bottle for 5-day latency measurement.
The open contact design ensures that the Probe is in good contact with the surface, and the Teflon wire combines flexibility and easy cleaning characteristics to withstand high temperatures up to 300 ° C, and the lightweight shape avoids temperature interference.
With IP67 waterproof and dustproof housing, it supports external Probe measurement in the range of -40 to 125 ° C, and can store up to 16,000 readings in a single channel, with high and low temperature alarm LED indicators.
Equipped with folding penetrating stainless steel Probe, NTC Thermistor Sensor for accurate measurement, temperature range -50~ 300 ℃, Protection Rating IP67, suitable for semi-solid and frozen material temperature detection.
Polarographic probe accurate to 0.3ppm, equipped with 4 Meters of cable to facilitate measurement of hard-to-reach areas; automatic temperature compensation range 0.0-50 ℃, support salinity and height compensation to ensure on-site data Reliability.
With IP67 waterproof rating, it can be dustproof and waterproof. Built-in Probe temperature measurement range is -20.0 to 60.0 ° C, with accuracy +/- 0.2 ° C. Supports single channel up to 16,000 reading storage, and is equipped with high and low alarm LED prompts.
Using penetrating AISI 316 stainless steel Probe, temperature range -50.0~ 220 ℃, accuracy +/- 0.2 ℃, with boot Self-check function, easy to clean and suitable for semi-solid and frozen materials.
