Rotation speed 2500rpm, can handle 2000ml volume sample, integrated magnetic stirring, vortex mixing and microplate oscillation multi-function.
With point and continuous operation mode, Speed range 200-2500rpm, reinforced engineering plastics and TPU work surface, acid and alkali wear resistance, support magnetic stirring and microplate adaptation.
With PID temperature control mode, temperature uniformity up to +/- 0.5 ° C, support 0-100 hours timing and power failure automatic recovery function, double-decked heating system to ensure foster stability, suitable for a variety of microplate samples.
The stator diaMeter is 8mm, the maximum processing viscosity is 500CP, and the maximum linear speed is 8 m2/s. It is suitable for 10~ 60ml Sample Handling and is suitable for HR-6B/10B type homogenizer.
The stator diaMeter is 10mm, the maximum processing viscosity is 2000CP, and the maximum linear speed is 10 m2/s. It is suitable for HR-6B/10B type homogenizer, and the standard Processing capacity is 30-150ml.
With magnetic stirring function, the maximum stirring capacity of 2000ml, Speed range 200-2500rpm, vibration range 4.5mm, support point and continuous operation mode switching.
Using film heating and PID intelligent temperature control technology, the temperature control accuracy is up to +/- 0.3 ° C, the temperature uniformity is less than or equal to +/- 0.5 ° C, and the automatic preheating and power failure recovery functions are supported.
The small design is only 23x20cm, the maximum centrifugal force is 500xg, and the speed is 2500rpm. It can handle 2x96 hole plates, avoid liquid leakage by vertical loading, and improve the experimental efficiency.
The pat speed is 3~ 12 times/second, the pat spacing is 0~ 40mm, the homogeneity is soft and non-destructive, and there is no need to sterilize, which effectively prevents cross-contamination and protects the operator's safety.
Programmable setting of 3 to 12 times/second tap speed and 1 second to 100 minutes timing, adjustable tap spacing from 0 to 50mm, equipped with 4.3-inch touch screen and voice alarm function, effectively preventing cross-contamination.
The microcomputer control supports 8-stage programming, the pat speed is 3-12 times per second, and the time can be adjusted to 99 hours, 59 minutes and 59 seconds. The sample is handled without contact to avoid cross-contamination and no need to clean the utensils.
Programmable setting of 3 to 12 beats per second and 1 second to 100 minutes homogenization time, equipped with 4.3-inch touchscreen and voice alarm function, effectively separates microbial components in solid samples and prevents cross-contamination.
Stator diaMeter 6mm, maximum processing viscosity 100CP, maximum linear speed 5 m2/s, suitable for a variety of Sample Handling, providing stable and efficient homogenization performance.
Maximum processing viscosity up to 3000CP, suitable for HR500 and HR-25 series Homogenizer, providing stable Sample Handling capability to meet a variety of experimental needs.
Rotation speed 5000~ 30000rpm, Processing capacity 0.2~ 80mL, stainless steel working head corrosion resistance, large capacity battery supports outdoor mobile operation, suitable for a variety of cutter heads.
