Using electronic engraving technology to form a quadrilateral pyramid-shaped net hole structure, the number of lines 180LPI is inversely proportional to the wet film thickness, the width of the print surface is 70mm, and the surface chrome plating enhances the wear resistance and anti-corrosion performance.
Using 200LPI anilox roller and 70mm print width, metal anilox roller and rubber roller combination, the handle is made of stainless steel, suitable for a variety of inks Spreader and good sample repRoducibility.
With two test stations, the load range is 50~ 1000g, and three typical wear resistance tests of alcohol, eraser and pencil can be carried out, which is suitable for wear resistance evaluation of various coatings and materials.
The four-pyramid-shaped mesh structure is adopted, the number of lines is 150LPI, the width of the print surface is 70mm, the design of the mesh hole and the mesh wall optimizes the transfer uniformity of inks, and the wet film thickness decreases with the increase of the number of lines.
It adopts 120-wire metal anilox roller with quadrilateral pyramid net hole structure, the print width is 70mm, and the precision Spreader is implemented through electronic engraving technology. The operation is simple and the proofing repRoducibility is good.
The four pyramidal net hole structure is adopted, the number of lines is 220LPI and the wet film thickness are inversely proportional, the width of the printing surface is 70mm, and the surface chrome plating treatment improves Abrasion Resistance and corrosion resistance.
The four pyramidal net hole structure is adopted, the number of lines is 250LPI, the width of the printing surface is 70mm, and the surface chrome plating treatment improves the Abrasion Resistance and solvent corrosion resistance. The net hole and the net wall form an accurate inks transfer system.
Adopting quadrilateral pyramid mesh structure, line number 300LPI, print width 70mm, chrome plating on the surface to enhance Abrasion Resistance and block solvent corrosion, electronic engraving technology to ensure accuracy.
Rotation speed 40rpm and roller diaMeter 150mm design, suitable for a variety of resilience material testing, abrasion Travel 40mm, test load optional 5N or 1N, to ensure efficient and accurate wear performance evaluation.
Double station design can simultaneously carry out two sets of tests, round trip 0-50mm adjustable, test load 80-990g adjustable range, equipped with a variety of weight to meet the wear resistance performance evaluation requirements under different load conditions.
With no-segment adjustable Friction Frequency, speed range of 60 times/minute, support 10-50mm friction distance free adjustment, mirror stainless steel material, provide a variety of clamping and wear mode, power failure memory function to ensure test continuity.
Precise load of 500g ensures test Stability and is suitable for calibrating and testing Wear resistance Testers to improve equipment performance.
The equipment is equipped with eight independent stations for simultaneous testing, supporting 24mm and 60.5mm Li Sharu motion trajectories, with a maximum motion range of 60.5mm. It uses a 395g fabric weight and a 2385g pressure clock system to achieve multi-standard material wear resistance evaluation.
Measurement principle of 90 ° scattering light, Measurement range 0~ 200NTU, resolution 0.01, High Accuracy optical path system and stable circuit, support for a variety of turbidity Unit switch, with print interface convenient data output.
Can be connected to Leeb Hardness Tester directly print measurement data, support a variety of surface Measurement range including R10-R50 cylindrical surface and SR10-SR30 sphere, easy data recording.
