It can simultaneously measure 6 paraMeters such as wind speed, wind temperature and wind direction, equipped with 24 sets of Data storage functions, adopts ultra-low friction bearings to ensure High Accuracy measurement, and supports USB and Bluetooth data transmission methods.
Simultaneous measurement of wind speed, wind temperature, wave height, wind level and air volume, equipped with low friction bearing impeller Sensor to ensure +/- 2% accuracy, support 24 data storage and USB/Bluetooth communication methods.
With 0.3~ 45m/s wide range wind speed measurement and 0~ 45 ℃ wind temperature detection capabilities, support multi-unit switching and maximum MIN Minimum recording, equipped with backlight display and low power prompt function, resolution of 0.001m/s.
Simultaneous measurement of wind speed, wind temperature, wave height and air volume, equipped with 24 sets of data storage functions, sampling rate of about 1 second, low friction bearing impeller Sensor to ensure measurement accuracy.
Vertical manifold design with adjustable wind speed system, the working wind speed can be adjusted from 0.3 to 0.6m/s, the cleanliness level can reach 100, compact and portable, and equipped with infrared remote control operation.
Flow rate of spray 0-80CFM adjustable, spray distance 3-4 feet, visualize airflow direction and speed, support 30 minutes of continuous spray, easy flow and pressure equilibrate test.
The vertical airflow design is adopted, the wind speed is steplessly adjustable from 0.3 to 0.6m/s, and the infiltrating efficiency of 0.3 μm particles with HEPA Filter is 99.99%. It has UV interlocking and real-time wind speed monitoring functions.
The mirror stainless steel liner is easy to clean, Temperature Fluctuation +/- 0.5 ℃, three-speed wind speed adjustment to avoid sample volatilization, environmentally friendly refrigerant effectively reduces energy consumption and noise.
Vertical manifold with quasi-closed Glass damper, adjustable wind speed range 0.3~ 0.6m/s, compact design for easy placement, equipped with remote infrared control function.
Adopting a vertical airflow design, the wind speed is steplessly adjustable from 0.3 to 0.6m/s, and the HEPA Filter is equipped with a 99.99% efficiency for trapping 0.3μm particles. It has UV lighting interlock and real-time wind speed monitoring functions.
Measurement unit conversion function, support 24 data storage, Ultra low friction bearing Sensor to ensure high Sensitivity and accurate measurement, wind speed measurement handle can be separated from the fuselage for easy operation.
The vertical airflow design is adopted, the wind speed is 0.3-0. 6m/s stepless and adjustable, and the accuracy is 0.01m/s; the HEPA Filter has a 99.99% retention efficiency for 0.3μm particles, and is equipped with a pre-Filter to extend the life.
Automatic Y-direction cutting, high positioning accuracy, adjustable feed speed 0.7-36 mm/min, cutting blade size Φ 205mm, equipped with a circulating chill down system to ensure that the surface of the sample is bright and flat without burns.
Manual measurement of paint film Hardness, load 500g, test angle 45 °, can be inspected in any direction, three points contact with the measured surface.
Manual measurement of paint film Hardness, load 1000g, test angle 45 °, three-point contact with the tested surface design, suitable for inspection in any direction.
