Double shell structure with Air-Cooled system to achieve rapid cooling, 51 program temperature control system to ensure +/- 1 ℃ accuracy, the highest Operating temperature of 1700 ℃ and equipped with corundum tube to ensure high temperature Stability.
With a wide frequency range of 64Hz-2MHz, it can detect longitudinal crazing and transverse defects, adapts to a variety of Probe types, supports automatic phase analysis and zero correction functions, and is suitable for high-speed inspection environments.
Using 330 * 230mm carbon steel baseplate and 22 * 985mm stainless steel pole, with aluminum alloy chuck, to achieve stable clamping and flexible height adjustment, suitable for a variety of experimental devices.
With ten independent flaw detection channels, the gain range is 120dB, the frequency band is 0.4~ 20.0MHz, and it supports automatic generation of DAC Linear dispersion and 500 data storage for efficient defect identification.
Double shell structure with cold air system to achieve rapid cooling, 51 program temperature control system to ensure +/- 1 ℃ accuracy, the highest Operating temperature of 1700 ℃, corundum Furnace tube high temperature performance.
With 15 independent flaw detection channels and Automatic calibration function, the near-field blind area is small to meet the thin-walled tube detection, the working Frequency is 0.4MHz~ 15MHz, the Continuous Operating Time is more than 8 hours, and the waterproof, oil-proof and dust-proof design is supported.
It can measure the minimum inner diaMeter of 6mm aluminum tube and 8mm thickness profile, Indication Error 0.5HW, using high strength pointer and special steel pressure needle, support Hardness value multi-standard conversion.
Equipped with 10 independent flaw detection channels and 110dB gain range, supports DAC Linear dispersion automatic generation and 500 data storage, adopts 5.5-inch EL flat screen display, weighs only 1.6kg and is easy to carry, and can work in -20 ℃~ 50 ℃ environment.
With 130dB high gain and Automatic calibration function, support 100 independent flaw detection channels and 1000 waveform storage, Scanning range 0-10000mm, to meet the needs of a variety of material flaw detection.
Double shell structure with cold air system to achieve rapid cooling, 51 program temperature control system to ensure Temperature control accuracy +/- 1 ℃, the highest Operating temperature of 1400 ℃, support stable operation in a variety of atmosphere environment.
With 16 flaw detection channels and 0.5~ 20MHz Frequency range, it supports Automatic calibration probes and generates DAC Linear dispersion. High Sampling rate and low noise design meet a variety of operating conditions inspection needs.
Scanning range 0-10000mm, working time 8 hours, waterproof and dustproof function, support 100 flaw detection channels and three probe modes, can automatically generate DAC Linear dispersion and store 300 inspection data.
With 100 flaw detection channels and 300 graphics storage capacity, support three probe modes and automatically generate DAC Linear dispersion, waterproof and dustproof design to adapt to harsh environments, Operating temperature range -27~ 70 ℃.
The gap height is adjustable from 0 to 3000μm, the minimum scale is 5μm, and the aluminum alloy material can be completely disassembled and cleaned by anode treatment. It is suitable for Drawdown Vacuum Plate, Glass plate and other solid substrate film preparations.
The device uses 1200-1500lx Illumrination degree, achieves 80x magnification and 0.01mm resolution through scale Microscope, and can measure the maximum aperture of 2mm, suitable for aluminum foil pinholing light transmission observation.
