Using 2268 +/- 7g standard brush parts, sanding speed 50cpm, automatic counting function to ensure test Repeatability, linear reciprocating motion simulates actual sanding conditions.
Easy to use magnetic suction Cup loading and unloading, sanding times 0~ 9999 two-way count, friction load 570 +/- 20g, additional weight adjustment load, suitable for undercoating and putty anti-sanding performance test.
Adopt double grinding head linear friction mode, load 570 +/- 20g adjustable, working plate Rotation speed 0~ 135rpm, magnetic chuck design makes sample loading and unloading convenient, the counter directly reads the number of sanding.
With 0~ 135cpm friction speed range and 155mm Test Travel, using two-way counting system, can be configured with additional weight adjustment load, suitable for a variety of sample size sanding resistance test.
Adopt 37 +/- 2cpm friction speed, 300mm sanding Travel, 1000g standard load, automatic counting to set value stop, Repeatability is excellent.
Friction speed 0~ 135cpm, Test Travel 155mm, round-trip count 0~ 9999, suitable for accurate determination of sanding performance of undercoat and putty.
The use of diamond sanding needles can flatten the surface of the grinding wheel, improve the utilization rate of abrasive wheels, and is equipped with a water supply system to support wet grinding and dry grinding. The size of abrasive wheels is about 250 × 30 × 32mm, and the Rotation speed is 1400rpm.
Using diamond sanding needle to smooth the surface of abrasive wheels, abrasive wheels stepless speed range of 500~ 1450rpm, equipped with stainless steel settling filtrate drawer to prevent clogging, wet grinding dry grinding can be applied.
Using metal layer plate structure, Temperature range -7~ 70 ℃, support 13 point temperature measurement, can simultaneously Spreader 6 samples, through drying air flow and layer temperature to achieve accurate film formation detection.
High Accuracy stepper motor, speed range 0-135 times/min, test stroke 155mm, equipped with manual suction Cup and a variety of weights, can be freely set the number of times 0-9999.
Grinding hard chrome metal pressure plate, adjustable temperature range -10~ 80 ℃, equipped with 10 point temperature transducer, through drying air flow to prevent condensation, ensure test repeatability, in line with a number of international standards.
It adopts 96-hole 0.2ml design, supports 100 ℃ high temperature environment, is compatible with a variety of centrifuge tube modules, and meets the thermostatic treatment requirements of different specifications of samples.
Standard and penetration dual mode, no need for sanding paints to directly measure the thickness of the substrate; range 0.75-500 mm, display accuracy 0.01mm; 2.3 inch color screen display, large capacity storage of 2000 data, support group storage and Bluetooth transmission.
Using 8.0mmPP polypropylene (PP) plate welding, strong acid and alkali corrosion resistance, surface wind speed 0.4-0 m/sec, noise control below 65dB, the baffle can be disassembled and assembled with repeability to ensure uniform gas discharge.
Support 0.1-1 steel plate and 0.1-2 Aluminum Panel test, can complete 0T to 1T multi-stage bending, equipped with pliers pressing device and tape adhesion inspection function, to meet the standard bending test process.
