The imported central guide Rod material has high accuracy and abrasion resistance, the shell is made of super hard aluminum material to resist on-site damage, and the external spring coil pointer slider structure is easy to adjust the friction force. The nominal kinetic energy is 2.207J, and the strength measurement range is 20-60Mpa.
The non-contact grating optocoupler Sensor is used to automatically collect data, with a nominal kinetic energy of 2.207J, supports automatic calculation of intensity and voice broadcast, and has a built-in steel anvil calibration function to improve detection efficiency and accuracy.
Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
The instrument employs the principle of heavy hammer impact, with a drop height adjustable within the range of 1000 ± 5 mm and a hammer mass of 500 ± 1 grams, designed for the precise determination of a material's puncture resistance.
Low-frequency signal penetration depth of 20mm, can simultaneously measure concrete carbide moisture content and plaster moisture content, built-in environment Sensor, support a variety of professional probe expansion measurement function.
Using 2000g heavy hammer and 16mm punch, Impact depth 2.5mm, no secondary rebound phenomenon, to ensure accurate and reliable test results.
Impact height 0-100cm adjustable, Graduation 1cm; equipped with a variety of hammer mass such as 1000g and punch diaMeter such as Φ 12.7mm, support accurate deformation testing, suitable for coating impact resistance evaluation.
Using 5cm ³ standard measurement hammer volume, the accuracy of 0.001g, through the V-shaped groove placed riding code recovery equilibrate, can quickly and accurately measurement of liquid specific gravity.
Impact height up to 120 cm, weight weight mass 1000g, no secondary rebound after impact, to ensure accurate and reliable test results, suitable for film impact performance evaluation.
Measurement range 0-10mm, accuracy ≤ 0.02mm, Graduation 0.001mm, probe diaMeter Φ 20mm plane, portable handheld design, in line with chemical industry standards.
Measurement accuracy of 3% +/- 3μm, range 40-1200μm, support delamination measurement and large capacity Data storage, suitable for on-site rapid detection.
Impact height up to 120 cm, using 1000g standard hammer body, no secondary rebound phenomenon after impact, to ensure accurate and reliable test results.
Using low-frequency signal transmission technology, the measurement depth is up to 20mm, and the humidity distribution map is displayed in real time through Bluetooth connection APP, and the extension Rod can be selected to facilitate large-area measurement.
Measurement principle using ultrasonic, Measurement range 50~ 3800μm, accuracy +/- (2μm + 3%), suitable for concrete and fiberglass substrate Coating thickness detection.
Using light alloy main body and miniature hydraulic system, the pulling force reaches 40KN, the range is 0-40KN, the accuracy is 2%, supports 10 numerical corrections and 500 Data storage, and the ultra-low power consumption works continuously for more than 200 hours.
