It can measure planar and cylindrical surface roughness, with a minimum diaMeter of 5mm and a maximum depth of 22mm, and supports a variety of Sensors to adapt to different workpiece shapes.
It can be extended by 50mm, and up to 2 pieces can be installed to achieve 100mm deep hole measurement; it is suitable for deep hole internal surface roughness detection, and needs to cooperate with the measurement platform to ensure Stability.
The thickness of the pressurable steel plate Aluminum Panel is 0.2~ 1.5mm, the weight of the whole machine is 50kg, and the compact shape is only 300 * 300 * 190mm, which meets the NCCA standard T-Bend test method.
It can measure the groove surface roughness with a groove width greater than 3mm and a groove depth less than 10mm, and is compatible with flat and cylindrical measurement. It can be used with the measurement platform to achieve accurate detection.
Made of stainless steel, equipped with two drawdown blades with surface roughness Ra0.4, Measurement range 0-50 microns, minimum reading 5 microns, effective groove size 140mm × 13mm, suitable for laboratory fine inspection.
High-speed DSP processor is used to improve Measurement speed, support Ra0.05-10.0 μ m Measurement range, Sensor host integrated design is convenient for field use, and can measure the cone surface and groove of the outer circle.
DSP chip control, Measurement speed and low power consumption; Support 160μm large-range measurement, up to 320μm; Multi-ParaMeter measurement function, compatible with ISO, DIN, ANSI, JIS multiple national standards.
Provide 25, 40, 70, 100 four profile specifications, size 87x87x2.5mm, weight only 60 grams, Portable design is convenient for quick comparison and evaluation on site.
Using rigid polyester plate with foam rubber cushion, size 240x340mm, can absorb operating pressure, improve proofing Repeatability and uniformity, suitable for a variety of substrate testing.
Small size only 106 * 70 * 24mm, weight 200 grams easy to carry; measurement of outer circle, cone, plane and groove, Indication Error ≤ +/- 15%, using piezoelectric crystal Sensor to ensure measurement Reliability.
Measurement range from 5mm, depth up to 22mm, suitable for a variety of Roughness Gauge to achieve profiled surface detection.
The demoulding frame design effectively reduces the accumulation of edge paints, is equipped with 4mm suspension hole to achieve non-marking vertical horizontal suspension, 0.8mm steel plate substrate to ensure test Stability, PE protective film to prevent transportation damage.
The stainless steel material is corrosion-resistant, with a heating area of 0.06 square Meters. The heating is fast and uniform, and the operation is safe and easy. It is suitable for a variety of temperature test requirements.
Built-in stylus design Measurement range 0~ 500 microns, can measure more than 50 readings per minute, equipped with tungsten carbide tip and aluminum oxide wear surface, with temperature compensation function and meet many international standards.
Standard light sources including D65 and UV, seamless construction to ensure no light leakage, special steel plate base for enhanced durability, no preheating and low energy consumption, support for Illuminant use time display and automatic switching function.
