CATEGORIES

    Intelligent Temperature and Humidity Meter

    Overview Products Knowledge Standards Terms
    The intelligent temperature and humidity meter detects environmental temperature and humidity through built-in sensors, converts physical quantities into electrical signals, analyzes them via a microprocessor, and displays the values. It is used for real-time monitoring of environmental conditions in laboratories, warehouses, and other locations to ensure that material storage and production processes comply with temperature and humidity requirements.
    Selection
    When selecting, focus on whether the measurement range and accuracy meet the requirements. The sensor type affects response speed, and the device should have data recording or alarm functions. Consider the equipment's protection rating to suit the environment, calibration cycle, and communication interfaces for convenient data management, as well as the power supply method to match the usage scenario.
    Display method
    Measurement function
    Measurement method
    Maximum temperature
    minimum temperature
    temperature accuracy
    maximum humidity
    Humidity accuracy

    Terms

    Temperature, Humidity, and Three-Axis Vibration Test Chamber
    Damp Heat Test Chamber
    Formaldehyde Climatic Chamber
    Hygrothermograph
    Laboratory temperature and humidity meter
    Environmental Damp Heat Test Chamber
    Temperature and Humidity Cycling Test Chamber
    Constant Temperature and Humidity Test Chamber
    Condensation Test Chamber
    Paint Film Tackiness Tester

    Standards

    Active GB/T 4937.42-2023
    Semiconductor devices—Mechanical and climatic test methods—Part 42:Temperature and humidity storage
    Active GB/T 2424.27-2013
    Environmental testing - Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers
    Active GB/T 9278-2008
    Temperatures and humidities for conditioning and testing of paint specimens

    Instruments

    SANFA LHP-160E Constant Temperature and Humidity Incubator Touchscreen Controller
    SANFA LHP-160E Constant Temperature and Humidity Incubator Touchscreen Controller

    Equipped with intelligent Touchscreen controller and ultrasonic humidifier, Temperature Fluctuation +/- 0.5 ℃, Humidity Fluctuation +/- 5% RH, supports programmable control and a variety of safety protection functions, suitable for accurate environment simulation.

    $ 1716.00
    SANFA LHP-250EL Constant Temperature and Humidity Incubator
    SANFA LHP-250EL Constant Temperature and Humidity Incubator

    Environmentally friendly refrigerant design, Temperature Uniformity +/- 1 ° C, Humidity Fluctuation +/- 5% RH, equipped with intelligent Touchscreen controller and ultrasonic humidifier, supports programmable control and a variety of safety protection functions.

    $ 4133.00
    SANFA LHP-300E Constant Temperature and Humidity Incubator 300L Volume Temperature and Humidity Control
    SANFA LHP-300E Constant Temperature and Humidity Incubator 300L Volume Temperature and Humidity Control

    300L high-capacity design, temperature uniformity up to +/- 1 ° C, humidity fluctuation of +/- 5% RH, equipped with intelligent Touchscreen controller and ultrasonic humidifier, supports programmable control and a variety of safety protection functions.

    $ 2355.00
    SANFA LHP-160EL Constant Temperature and Humidity Incubator Precise Temperature and Humidity Control, Environmentally Friendly Refrigerant
    SANFA LHP-160EL Constant Temperature and Humidity Incubator Precise Temperature and Humidity Control, Environmentally Friendly Refrigerant

    Environmental friendly refrigerant design, Temperature Uniformity +/- 1 ℃, humidity fluctuation +/- 5% RH, equipped with intelligent Touchscreen controller and multiple safety protection system to ensure stable and reliable experimental environment.

    $ 3436.00
    SANFA LHP-300EA Constant Temperature and Humidity Incubator Mirror Stainless Steel liner Temperature and Humidity Control
    SANFA LHP-300EA Constant Temperature and Humidity Incubator Mirror Stainless Steel liner Temperature and Humidity Control

    Mirror stainless steel liner is easy to clean, temperature uniformity +/- 1 ℃, humidity fluctuation +/- 5% RH, with over-temperature protection and intelligent controller to ensure safe and reliable experiments.

    $ 5897.00
    SANFA LHP-250EA Constant Temperature and Humidity Incubator Environment friendly refrigerant Humidity fluctuation +/- 5% RH
    SANFA LHP-250EA Constant Temperature and Humidity Incubator Environment friendly refrigerant Humidity fluctuation +/- 5% RH

    Using environmentally friendly refrigerant, Temperature Uniformity +/- 1 ℃, humidity fluctuation +/- 5% RH, equipped with intelligent Touchscreen controller and ultrasonic humidifier, supports programmable control and remote monitoring interface to ensure stable and reliable experimental environment.

    $ 5529.00
    SANFA LHP-400E Constant Temperature and Humidity Incubator Environment friendly refrigerant, humidity fluctuation +/- 5% RH
    SANFA LHP-400E Constant Temperature and Humidity Incubator Environment friendly refrigerant, humidity fluctuation +/- 5% RH

    The equipment uses environmentally friendly refrigerant, Temperature Uniformity up to +/- 1 ℃, humidity fluctuation control at +/- 5% RH, equipped with intelligent Touchscreen and a variety of safety protection functions to ensure stable and reliable experiments.

    $ 2763.00
    ZKHS GDS-225B Temperature & Humidity Chamber 7.0 inch Touchscreen temperature control humidity
    ZKHS GDS-225B Temperature & Humidity Chamber 7.0 inch Touchscreen temperature control humidity

    Using 7.0 inch Touchscreen controller, high temperature and humidity control accuracy, Fluctuation ≤ +/- 0.5 ℃, humidity deviation + 2, -3% R.H; built-in stainless steel humidifier, multi-wing air supply circulation, uniform temperature and humidity distribution, improve test reliability.

    $ 6560.00
    AISRY NBC-150L-60 Programmable constant temperature and humidity testing machine, high and low temperature Humidity Cyclic Chamber
    AISRY NBC-150L-60 Programmable constant temperature and humidity testing machine, high and low temperature Humidity Cyclic Chamber

    Adopt equilibrating Conditioning Control system, Temperature range -60~ 150 ℃, humidity control 20~ 98% RH, with multi-stage intelligent output and energy saving function, special air circulation design to ensure uniform temperature, built-in a variety of protection systems to ensure safe operation.

    $ 3531.00
    AISRY NBC-1000L-60 Programmable constant temperature and humidity testing machine, high and low temperature Humidity Cyclic Chamber
    AISRY NBC-1000L-60 Programmable constant temperature and humidity testing machine, high and low temperature Humidity Cyclic Chamber

    Adopt equilibrating Conditioning Control system, with multi-stage intelligent output to ensure stable Humidity. Temperature range -60~ 150 ℃, Humidity Control Range 20~ 98% R.H., with energy saving function and comprehensive protection system to ensure long-term accurate operation.

    $ 6330.00
    SANFA LHP-500EL Constant Temperature and Humidity Incubator High Accuracy Temperature and Humidity Control Environmentally Friendly Refrigerant
    SANFA LHP-500EL Constant Temperature and Humidity Incubator High Accuracy Temperature and Humidity Control Environmentally Friendly Refrigerant

    Adopted fluorine-free environmentally friendly refrigeration design, temperature uniformity +/- 1 ° C, humidity fluctuation +/- 5% RH, equipped with intelligent Touchscreen controller and ultrasonic humidifier, supports programmable control and a variety of safety protection functions.

    $ 6110.00
    SANFA LHP-250EB Constant Temperature and Humidity Incubator Microcomputer Temperature and Humidity Control
    SANFA LHP-250EB Constant Temperature and Humidity Incubator Microcomputer Temperature and Humidity Control

    Microcomputer temperature and humidity controller, Temperature Fluctuation +/- 0.5 ℃, humidity fluctuation +/- 5% RH, with over-temperature protection, independent temperature limit alarm system to ensure safe and stable operation of the experiment.

    $ 6691.00
    ZKHS GDJS-800B Temperature & Humidity Cycling Chamber 7.0 inch Touchscreen temperature control humidity
    ZKHS GDJS-800B Temperature & Humidity Cycling Chamber 7.0 inch Touchscreen temperature control humidity

    Using 7.0 inch Touchscreen controller, high temperature and humidity control accuracy, Temperature Fluctuation ≤ +/- 0.5 ℃, humidity deviation + 2, -3% R.H, with multi-wing air supply cycle to ensure uniform distribution, improve test reliability.

    $ 11079.00
    AISRY NBC-80L-60 Programmable constant temperature and humidity testing machine, high and low temperature Humidity Cyclic Chamber
    AISRY NBC-80L-60 Programmable constant temperature and humidity testing machine, high and low temperature Humidity Cyclic Chamber

    Adopt equilibrating Conditioning Control system, Temperature range -60~ 150 ℃, Humidity range 20~ 98% R.H., with multi-stage intelligent output and energy saving functions to ensure long-term stable operation and reduce Power consumption.

    $ 3102.00
    HZAOC GDJS-010B Temperature & Humidity Cycling Chamber temperature and humidity control accuracy
    HZAOC GDJS-010B Temperature & Humidity Cycling Chamber temperature and humidity control accuracy

    Temperature range -30~ 150 ℃, humidity control 30~ 98% R.H., using PID control mode to ensure small temperature and humidity fluctuations, equipped with independent over-temperature protector and multi-layer sealing structure to improve test reliability and safety.

    $ 12579.00

    Articles

    Constant Temperature and Humidity Aging Chamber for Testing Hygrothermal Aging Performance of Composite Materials
    This article introduces how to use a constant temperature and humidity aging chamber to test the hygrothermal aging performance of composite materials. Hygrothermal aging refers to the gradual decline in material performance under the combined effects of temperature and humidity.
    Selection of Temperature and Humidity Meters: Sensor Accuracy and Response Time
    When selecting a temperature and humidity meter, sensor accuracy and response time are key parameters. Accuracy refers to how close the measured value is to the actual value, typically expressed as an allowable error, with high-precision sensors being more costly.
    Xenon lamp aging test chamber evaluates the long-term outdoor performance of resins.
    Xenon lamp aging test chambers simulate environmental conditions such as sunlight, temperature, and humidity to accelerate the testing of the weather resistance of materials like resins in a laboratory setting.
    Key Operation Points of Carton Burst Strength Tester
    The carton bursting strength tester is used to measure the maximum force that paperboard can withstand before rupturing under uniform pressure, which is important for packaging quality control. Before operation, ensure that the instrument is stable and the calibration is valid. The samples should be cut according to standards and conditioned under standard temperature and humidity conditions.
    Constant Temperature and Humidity Chamber Testing for Environmental Adaptability of Hot Melt Adhesive
    This article introduces the method of testing the environmental adaptability of hot melt adhesive using a constant temperature and humidity chamber. The performance of hot melt adhesive is easily affected by temperature and humidity, and the purpose of the test is to evaluate its stability under different climatic conditions.
    Constant Temperature and Humidity Chamber Testing for Ink Environmental Adaptability
    This article introduces the method of testing the environmental adaptability of ink using a constant temperature and humidity chamber. Ink is prone to issues such as adhesion, discoloration, or reduced adhesion when exposed to changes in temperature and humidity.
    UV aging test machine evaluates the UV resistance of ink.
    This article introduces how to test the UV resistance of ink using a UV aging test chamber. The equipment accelerates aging by simulating ultraviolet light and controlling temperature and humidity, with key testing conditions including temperature, irradiance, and cycle time.
    Operation Specification for Circular Scratch Adhesion Tester
    The circle method adhesion tester is used to evaluate the adhesion strength between coatings and substrates. Before operation, it is necessary to inspect the instrument, prepare samples, and control the ambient temperature and humidity. During testing, the sample should be secured, appropriate load and scratch spacing should be selected, and the stylus should be moved at a constant speed to create a circular scratch.
    Analysis of the Influence of Temperature and Humidity on Paper Folding Endurance Testing
    This article analyzes the impact of temperature and humidity on paper folding endurance testing. Paper folding endurance testing is typically conducted under standard temperature and humidity conditions, such as 23°C and 50% relative humidity.
    Rapid prediction of coating chalking and gloss loss failure through UV aging tests.
    This article introduces how UV aging tests can quickly predict the failure of paint chalking and loss of gloss. The test accelerates coating aging in the laboratory by simulating solar ultraviolet light, temperature, and humidity, while observing phenomena such as chalking and loss of gloss.
    Key points for selecting a multi-factor comprehensive test chamber with integrated temperature, humidity, vibration, and altitude systems
    The multi-factor comprehensive test chamber integrates four environmental stresses: temperature, humidity, vibration, and altitude (low pressure), used to simulate the reliability of products under complex environmental conditions.
    UV aging test chambers are used for the aging evaluation of polymer materials.
    The UV aging test chamber accelerates the aging process of polymer materials by simulating ultraviolet radiation from sunlight, combined with temperature and humidity control, to evaluate their durability.
    How to Prepare Precise Film Layers Using a Laboratory Film Coating Machine
    Precise film preparation can effectively eliminate human operational errors by rationally selecting applicators (wire rods or blades) that match the material's rheological properties and precisely controlling coating speed, environmental temperature and humidity, and substrate conditions.
    Technical Selection and Application of Constant Temperature and Humidity Chambers
    This article primarily discusses how to select and use a constant temperature and humidity chamber. It is mainly used to test the performance of materials and products under varying temperature and humidity conditions.