Single arm double column structure equipped with hydraulic buffer device, drop height 400-1500mm adjustable and accuracy of +/- 10mm, support face angle full angle drop test and have electric reset function, maximum load weight 100kg to ensure test Stability.
Impact performance of the reflective film can be accurately measured by using the principle of free fall of steel ball, steel ball mass 450 +/- 3g, drop 250mm, reasonable structure and simple operation, safe and reliable measurement.
The single-arm double-column structure is equipped with a hydraulic buffer device, with a drop height error of no more than +/- 10mm and an angle error of less than 5 °. It supports seven-speed height adjustment and face corner drop mode, with a maximum load of 65kg and an electric lifting function.
With Vacuum chuck function, drop height 300~ 2000mm adjustable, support 0 °, 45 °, 90 ° multi-angle drop, with Acceleration and speed measurement, can accurately control the impact site.
Can test 300~ 1500mm drop height, bearing 100kg load, double wing structure to ensure that the drop plane error is less than 1 °, suitable for all kinds of Encasement box testing.
Pneumatic fixture is used to protect the pRoduct from deformation, and a protective box is equipped to prevent the specimen from rushing out. The drop height is adjustable from 300-1500mm, the test load is 2kg, and the height is displayed by High Accuracy steel ruler and digital display Meter.
With 1000g drop weight and 8mm punch, Impact height can be adjusted to 100cm, the degree of film damage is tested by free fall, and the structure is stable and easy to operate.
The single-arm double-column structure is equipped with an electric lifting device, with a drop height range of 300-1500mm, a test load of 0-80kg, and a buffer device to improve service life and stability. The height error does not exceed 2%.
The single-arm double-column structure is used to realize the free drop of the face corner, and the height tracking system is equipped to make the drop height error not exceed 2%. The buffer device improves the service life and safety of the equipment.
Adopting a single-arm double-column structure, equipped with a hydraulic buffer device to improve service life and stability, with a drop height range of 400 to 1500mm, it can test up to 80kg specimens, meeting a variety of standard testing requirements.
Adopting double column guide and hydraulic buffer system, the drop height range can be set from 0 to 2000mm, the maximum load is 300kg, and it supports all-round drop testing of edge angles and has upper and lower induction protection devices.
The equipment is designed with double rollers, with a test load of 5kg, a drop height of 500 + 1000mm, and a rotation speed of 5-20 times/minute to meet the needs of continuous rotary drop testing.
The equipment can perform continuous rotary drop test, drop height up to 1000mm, Test speed 5-20 times/min, suitable for Reliability verification of small electronic pRoducts.
Impact test with heavy hammer free fall, impact height 50cm, drop weight mass 1000g, punch diaMeter 8mm, safe and reliable operation, easy to use in the field and laboratory.
It can simultaneously test two devices, with a maximum load of 2kg and a drop height of 60 to 150mm. It uses pneumatic components and PLC control to achieve high-speed consistent testing, and has automatic stop and count functions.
