The adapter Rod is suitable for transverse displacement measurement, the measurement of grooves, crankshafts and other surfaces, the minimum groove of the workpiece to be measured is 7.5mm-20mm, and the measurement of steps with a height of less than 2.5mm.
Using semiconductor Sensor technology, the detection sensitivity can be adjusted to 50PPM methane, Response Time ≤ 1 second, Warm-Up Time is less than 110 seconds, support 9 hours of continuous work, with LED light alarm and low power indication function.
With 0-2000mT dual range switching and peak hold function, Hall Effect Sensor supports axial lateral measurement, and 4 ½ LCD display ensures clear and accurate readings.
Using D/8 structure to fit the human eye observation, built-in High Accuracy Light spectrum Sensor captures 400-700nm wavelength rays of light, quickly converts the light signal into accurate digital color information.
Contains 1026 standard Colors, conforming to the National Standard for Architectural Color Representation Methods, displaying 6 color samples per page, suitable for architectural color selection and management.
Electronic Sensor technology, accuracy of +/- 0.5%, support two-way detection and 10 custom test items, 7-inch Touchscreen easy to operate, real-time display torque indication and error.
Adopt 0.5% F.S. High Accuracy torque Sensor, support bi-directional torque test and 400 sets of Data storage, with locking force and opening force dual Measurement mode and peak hold function, to meet the needs of a variety of Encasement container testing.
Laser Sensor is used to directly measure the natural vibration Frequency of the belt, combined with the input belt mass and free length to calculate the tension, Measurement range 10Hz~ 500Hz, split Sensor size can penetrate into 66mm narrow space, support Metric Imperial Unit switch.
Using electronic Sensor technology, sampling speed up to 100HZ, accuracy level 1, support three units of automatic conversion and three test modes, with data storage and qualified judgment function, equipped with dedicated PC software.
Laser Sensor is used to directly measure the natural vibration frequency of the belt. Measurement range is 10-800Hz. The split probe size is 124 * 21 * 12mm and can penetrate into a small space of 66mm. It supports metric and imperial unit switching.
Laser Sensor is used to directly measure the natural vibration Frequency of the belt. Measurement range is 10Hz~ 800Hz. The size of the split Probe is only 124 * 21 * 12mm. It can penetrate into a small space of 66mm and supports metric and imperial Unit switching.
The dust density is measured by natural accumulation method, the diaMeter of the outflow port is 12.7mm, the funnel taper is 60 ° +/- 0.5 °, to ensure the stability of the free fall process, the volume of the measuringflask is 100mL, and the material is durable and easy to clean.
The device has +/- 0.5% high accuracy, the maximum clamping diaMeter is 200mm, supports three units automatic conversion and 99 sets of data storage, and is suitable for bottle cap opening and closing torque detection.
Electronic Sensor technology implementation 0.5 level accuracy, support three torque units automatic conversion, with peak hold and real-time tracking mode, can store 99 sets of data and automatically calculate statistical values.
Using parallel illumination hemispherical scattering integrating sphere photoelectric receiving mode, the accuracy of light transmitance and haze display is 0.01%, equipped with thin film magnetic fixture and liquid sample Cup, and supports 2000 sets of data storage.
