Special design container to ensure measurement conformity, suitable for color scheme, suitable for fine powder particle measurement, effectively avoid the influence of powder tightness and surface Smoothness.
Friction speed 0~ 135cpm, Test Travel 155mm, round-trip count 0~ 9999, suitable for accurate determination of sanding performance of undercoat and putty.
The three-phase asynchronous motor is used to operate stably with low noise and can operate for a long time; the dispersion disc stainless steel is resistant to corrosion, and the inner hexagon screw connection is easy to disassemble and assemble; the stepless speed regulation is 0~ 2880rpm, and the Processing capacity is 10L, which is safe, reliable and maintenance-free.
Adopting stepless speed regulation technology, the friction speed range is 0~ 135cpm, the test Travel 155mm, the number of times can be set and automatically counted to evaluate the sanding performance of undercoated putty.
The equipment can detect the crazing or peeling of the putty film after bending, equipped with R25 and R50 support film specifications, shaft Rod size is 50mm and 100mm in diaMeter, suitable for 0.2-0. 3mm thick tinplate plate.
Using ruby probe and digital Probe technology, Measurement range 0-5000μm, Response speed 0.3s, can intelligently identify iron powder putty layer, and support three-color backlight and custom alarm value prompt.
Can test flowability, Angle of Peace and Loose Bulk Density, equipped with 30ml stainless steel measuringflask and double powder plate, funnel diaMeter can be selected 5mm or 2.5mm, for precise control of powder mass.
Using ruby probe and digital Probe technology, Measurement range 0-3500 μm, error ≤ +/- ( 3% H + 2 μm), 0.5 seconds fast measurement, can identify iron powder putty layer and a variety of substrate types.
Double pulse Back flushing automatic powder cleaning, Laminating filter accuracy of 0.3 microns, powder gas separation efficiency, stainless steel material is durable, color change operation is simple, improve dust recovery efficiency.
The motor-driven edge rises at a rate of 3mm/min to generate and control crazing expansion, which can detect the crazing ability of putty against substrates, with a maximum lift of 20mm, suitable for standard frame 200 × 150mm test plates.
Using fixed funnel method to measure powder flowability, equipped with 10mm inner through Glass funnel and 0-100mm scale struts, can accurately measure cone height, meet the requirements of Pharmacopoeia and ISO standards.
Standard funnel method for metal powder flowability measurement, equipped with 2.5mm and 5mm pore diaMeter stainless steel funnel, can accurately measure 50g powder flow time to +/- 0.01s, suitable for powder testing such as cemented carbide.
Measurement accuracy 0.02mm, can control the slow expansion of crazing, test putty layer anti-substrate crazing ability.
Easy to use magnetic suction Cup loading and unloading, sanding times 0~ 9999 two-way count, friction load 570 +/- 20g, additional weight adjustment load, suitable for undercoating and putty anti-sanding performance test.
The stainless steel funnel is used to ensure that the surface is smooth and free of static electricity. It is equipped with two specifications of funnel, which are suitable for free-flowing powder and caking trend powder respectively. The receiver volume is 500ml, and the sampling volume is 510-550ml, which meets the standard test requirements.
