Adopting the principle of the inclined rolling ball method, the adhesion is measured by the short contact between the steel ball and the sample, the adjustment range of the tilt angle is 0-60 °, and the rolling ball of 1/32 to 1 inch is supported. The width of the test area is 80mm.
Adopting the test principle of inclined rolling ball method, the tilt angle adjustment range is 0~ 40 °, equipped with 32 GCr15 bearing steel balls, and the shape tolerance accuracy exceeds GB/T308 level 40 to achieve accurate initial Tack evaluation.
Equipped with three sets of independent rollers, load accuracy of +/- 5g, rolling speed of 300mm/min, can accurately simulate the bonding effect of materials under different pressure conditions, rubber wheel Hardness Hs80 +/- 5 to ensure test conformity.
Adjustable tilt angle 0~ 40 °, the steel ball meets the standard of GB/T308 grade 40 or above, which is convenient for angle and position adjustment.
Adopt oblique block to adjust the gap, good self-cumbersome and high adjustment accuracy; Roller cylindricity ≤ +/- 2um, Hardness up to HRC62 and hard chrome plating to prevent rust; Electric rolling can be reversed, and the film thickness and speed can be adjusted.
Brushless DC motor, Rotation speed 100rpm, support positive and negative rolling mode, compatible with different size testtube, low noise and maintenance-free operation, suitable for long-term continuous operation.
Adopt horizontal three-roller extrusion grinding, roller clearance hand adjustment, maximum processing viscosity 3000000cps, roller can be cooled down water temperature control, fineness control precision, suitable for a variety of viscosity materials.
Complete 64 Sample Handling in 1 minute, use vertical oscillation to ensure Stability, noise is lower than 55dB, support dry grinding, wet grinding and low temperature grinding, suitable for a variety of specifications grinding tube.
Rotation speed 86rpm, disc diaMeter 240mm, weight of about 7.32kg four pieces of adjustable pressure, double transmission to ensure that the number of revolutions is accurate, concave socket design for easy replacement of grinding, strong anti-interference and foot shock absorption anti-skid.
Complete 48 Sample Handling within 1 minute, adopt fully enclosed design to avoid cross-contamination, support 0-70Hz homogenization speed and low temperature grinding mode, and the noise is lower than 55dB to ensure a quiet experimental environment.
The surface of the three rollers is squeezed and rubbed at different speeds to achieve grinding. The roller is made of cold hard alloy steel, with a surface Hardness of HS70 ° or more, a fineness of grinding up to 15μm, and a capacity of 350Kg/h.
The equipment adopts electric lifting and frequency conversion speed regulation, Rotation speed 0-3000 rpm, equipped with double-decked chilled down jacket and zirconia bead grinding medium to achieve efficient wet dispersion grinding, small temperature rise and easy operation.
96 samples are ground in 1 minute, the noise is lower than 55dB by vertical oscillation, the sample tube is fully enclosed to avoid cross-contamination, and the adapter can cool down the liquidnitrogen to achieve a low temperature grinding environment.
Three rollers are used for mutual extrusion and friction at different speeds to achieve grinding. Hardness of the roller surface is above HS70 °, and fineness of grinding can reach 15 μm, which is suitable for grinding dispersion of high viscosity materials.
Rotation speed up to 3000rpm, fineness of grinding generally up to 10um or less, liquid-liquid dispersion ground up to sub-micron or even nano level; double-decked chilled down jacket design, conventional temperature rise less than 10º, to ensure pRoduct Stability.
