Adopt scraping method, equipped with 1 Meter Oven and UV light curing system, curing area 600 * 500mm, main peak wavelength 365nm, pRoduction speed 0-5m/min, with tension control unwinding to ensure uniform and stable Spreader.
LED Cold Illuminant Technology, No Infrared Radiation, Suitable for Heat Sensitive Materials; Power density 400-2400mw/cm ², curing area 500x400mm.
The digital display temperature control is accurate and reliable, the hot air circulation system is composed of a high temperature fan and a suitable air duct to improve the Temperature uniformity in the working room, and the heating wire is installed at the bottom to heat up quickly.
PRoduction speed 0-5m/min, effective application width ≤ 300mm, using scraping with UV light curing, drying tunnel length of 1 Meter, with tension control unwinding and Touchscreen operation.
Using 405nm wavelength and 0.8W/cm ² optical power density, UVLED output is concentrated, the photoelectric conversion rate is high, and the curing speed is fast; the cold light source has low heat radiation, avoids thermal stress deformation, and is suitable for thermal materials.
Using 395nm wavelength LED Illuminant, Light intensity 0-100% adjustable, equipped with Water-Cooled system to ensure stable operation, support 10-50mm irradiation distance, maximum conveying speed of 6 m/min, suitable for fine curing process.
Using 395nm wavelength LED Illuminant, Optical Power up to 12W/cm ², equipped with Water-Cooled system to ensure stable operation, adjustable irradiation distance of 10-50mm, support 0-100% stepless dimming, suitable for a variety of material curing needs.
Temperature range Rt + 10~ 200 ℃, Temperature Fluctuation +/- 1 ℃, Equipped with Forced Circulation Convection Channel and High Accuracy Platinum Resistance Sensor to ensure a stable high temperature environment, suitable for Sampling Handling and catalyst activation.
Effective application width up to 500mm, UV curing length 1000mm, using Touchscreen control, support 0-5m/min pRoduction speed, with tension control unwinding and adjustable UV UV light intensity 1-30mw/cm ² to ensure uniform curing.
Application width up to 400mm, pRoduction speed 0-5m/min adjustable, UV light curing area 400 * 1000mm, main peak wavelength 365nm, equipped with tension control unwinding and Touchscreen Operating interface to achieve stable Spreader and rapid curing.
Using dual Illuminant UV LED multi-directional irradiation, the transparent inlay was completed quickly in 60 seconds, the working capacity reached 20 samples, and the inlay Hardness after curing was 84~ 86 Shore D.
Measurement range -200 to 1370 ℃, using nano aerospace environmental insulation material, can operate stably in high temperature environment and record temperature data, support a variety of sampling rate selection.
The equipment adopts High Accuracy modular Spreader station, Spreader thickness range 0.01mm~ 2mm, coating speed 2~ 4.5m/min adjustable, with UV instant curing and heating function, suitable for a variety of materials such as paper, film and so on.
Temperature range Rt + 10~ 200 ℃, Temperature Fluctuation +/- 1 ℃, using forced circulation convection air duct to ensure uniform temperature, with over-temperature alarm and 9999 minutes timing function, suitable for a variety of laboratory high temperature processing needs.
The equipment adopts reticulated roller painting technology, Spreader thickness range 0.005-3mm, equipped with 1 Meter Air-Cooled curing box and feeding trough heating function, the temperature can reach 200 ℃, to achieve accurate Spreader control and stable composite effect.
