Using dual-channel proportional value display, knob type operation is easy, flame size can be pre-selected, equipped with flameout protection device. Detection limit K ≤ 0.004mmol/L, Na ≤ 0.008mmol/L, Response Time < 8S, high stability.
Stainless steel combustion box flue gas and corrosion resistance, Control system Degree of automation, flame time 0-99 minutes and 99 seconds adjustable, flame height 20-100mm adjustable, automatic recording of the test process.
Gas detection alarm device and automatic exhaust system, flame time 0-999.9s adjustable, flame height 20-175mm adjustable, support a variety of combustion angle adjustment to ensure safe and accurate testing.
Adopt back heating and horizontal forced convection technology to ensure uniform temperature in the studio; Temperature control accuracy up to 0.1 ° C, Fluctuation +/- 0.5 ° C; Sensor fault alarm and over-temperature protection function, Timer Range 0-9999 minutes.
Adopt back heating structure and horizontal forced convection technology to ensure studio Temperature uniformity. Equipped with High Accuracy Platinum Resistance Sensor, Temperature Fluctuation is only +/- 0.5 ° C, supports 0-9999 minutes timing function, and has multiple Safety protection mechanisms.
Equipped with combustible gas concentration detection and alarm system, automatically cut off the gas and start the exhaust; Test space ≥ 0.5m ³, flame height 20-175mm adjustable; support a variety of combustion angle adjustment to ensure test accuracy.
Using concave Holographic grating spectroscopy, Light spectrum is pure and accurate, pass band is narrow, Sensitivity is high; Five elements can be combined with any combination at the same time, automatic ignition and flame monitoring, Response Time is less than 8 seconds, Stability change within 15 seconds ≤ 2%.
Test space ≥ 0.5m ³, flame application time 0~ 99min99s can be set, combustion angle 20 °, 45 °, 90 ° adjustable, flame height 20mm to 175mm adjustable, motor drive automatic alignment spline.
Adopt back heating and horizontal forced convection design, Temperature Fluctuation +/- 0.5 ℃, Temperature range + 10 ℃~ 200 ℃, Sensor fault alarm and 9999 minutes timing function to ensure stable and efficient experiment.
Adopt back heating horizontal forced convection technology, Temperature Fluctuation +/- 0.5 ℃, Temperature range RT + 10~ 200 ℃. Sensor fault alarm, over-temperature protection and independent temperature limit Control system ensure the safety and reliability of the experiment.
Equipment supports vertical and horizontal combustion test, can set combustion and extinguishing time and repeability times, automatic stop test, Internal dimensions 305 * 355 * 610mm, suitable for a variety of organic materials.
Adopt horizontal oscillation mode, Frequency 0-240rpm continuously adjustable, stable work and low noise, equipped with 340 * 250mm tray to meet the needs of a variety of experimental containers.
Horizontal Vibration Technology, Vibration Frequency 45-200Hz Adjustable, Throwing plate diaMeter 300mm, can handle multiple samples and automatically complete the polishing process.
Rated load 1000N, Travel 100mm, manual operation is stable, can adapt to a variety of Force Gauge, suitable for tension and compression load and plug force test, horizontal structure for desktop installation.
Horizontal forced convection technology to ensure Temperature uniformity, temperature control accuracy of 0.1 ℃, equipped with High Accuracy Platinum Resistance Sensor and 9999 minutes timing function, suitable for a variety of non-flammable and explosive materials processing.
