Fully pneumatic design ensures stable operation, adjustable spray gun settings for precise atomization and film thickness control, and magnetic panel supports multiple substrate tests.
Touchscreen operation, intuitive display, with frequency setting, digital display and automatic stop function, the liquid storage cylinder can adjust the dripping speed according to the national standard requirements, suitable for performance evaluation of various film composite treatment surfaces.
Equipped with double spray guns to achieve uniform lame plating, the lifting range of the spray gun is adjustable from 10-500mm, the integrated air filtrate adjustment system supports magnetic or vacuum panel fixing, and improves the coating test Repeatability.
With intelligent acceleration function, the stirring speed is adjustable from 0 to 1250rpm, the maximum stirring capacity is 2 liters, the Timer Range is 0 to 999 minutes, and the stainless steel panel is durable and easy to clean.
Support 0.1-1 steel plate and 0.1-2 Aluminum Panel test, can complete 0T to 1T multi-stage bending, equipped with pliers pressing device and tape adhesion inspection function, to meet the standard bending test process.
Flow rate of scruf liquid can be precisely controlled by using double brush to accelerate the simulated abrasion scraping experiment, and various consumables such as brush, scruf pad and sponge can be compared and tested.
Thickness 0.5mm fillet edge no burr design, surface with anti-rust oil to prevent oxidation, suitable for adhesion, Hardness, Impact and other coating performance test.
Film thickness 0.5mm, rounded edge design without burr, surface with anti-rust oil, suitable for coating adhesion, hardness, Impact and other performance testing experiments.
Film thickness 0.5mm, rounded edges without burr design, surface with anti-rust oil, suitable for adhesion, hardness, Impact and other paint performance testing experiments.
Film thickness 0.5mm fillet edge no burr design, with anti-rust oil to protect the surface, suitable for adhesion, hardness and other paint performance testing experiments, about 120 pieces per kilogram Encasement.
Measurement range of +/- 1000mV, equipped with large LCD display with background light, support manual two-point calibrating and automatic diagnostic function, can verify calibrated status and ElectRode status, fail safe alarm system to improve operational Reliability.
The stainless steel working panel has excellent corrosion resistance, the heating power is 1000W, and the temperature range is RT +~ 300 ℃ to meet various experimental needs.
Temperature control accuracy of +/- 0.1 ℃, using fuzzy PID control technology, with over-temperature alarm and temperature self-tuning function, heating material is high purity graphite, panel size 600 * 400mm.
The special forming process heater has no warpage deformation at high temperature, excellent corrosion resistance of the spray panel, uniform working surface temperature, Heating power 2 × 1000KW, rapid and safe heating.
Microcrystalline Glass panel resistant to strong acid and alkali, low expansion coefficient to ensure high temperature without deformation, the highest Operating temperature 450 ℃, surrounded by 316L stainless steel material comprehensive corrosion resistance.
