Testing the air Compressor

The inspection of air compressors involves checking parameters such as exhaust pressure, flow rate, oil content, and noise levels to confirm the operational status of the equipment. This ensures the stability of the air supply, preventing insufficient pressure or contamination from affecting laboratory instruments and product quality.
Selection
When selecting, consider matching the actual air consumption with the displacement, and determine the pressure range based on process requirements. Pay attention to the air dryness rating, check the equipment's energy efficiency label, and ensure ease of maintenance. Reserve appropriate capacity to handle peak air usage.

Terms

Standards

Instruments

Temperature range -40~ 130 ℃, Temperature Fluctuation ≤ +/- 0.5 ℃, using imported Air-Cooled fully enclosed refrigeration Compressor, with grounding protection, over-temperature protection, refrigerator overpressure overload protection and other functions.

$ 5187.00

Adopting a pure oil-free lubrication piston system, the noise value is only 59dB, and it is equipped with a 60L anti-rust treatment gas storage Tank. The air pressure can be adjusted within the range of 5-8Bar, and it has multiple automatic protection functions.

$ 1042.00

Air Compressor can reduce the working noise to about 43 decibels, the sound is extremely low, to meet the needs of various indoor environments for quiet operation.

$ 1655.00

Adopt piston structure, running Power 550W, noise value 58dB, with pure oil-free design, output gas clean, air pressure adjustable range 5-8Bar, automatic start-stop protection, service life of more than 15,000 hours.

$ 606.00

The noise at work is only 53dB, using oil-free lubrication piston system and Nano coating cylinder liner, the exhaust is clean, the service life is up to 20,000 hours, and it has multiple automatic protection functions, which is easy to operate automatically.

$ 1945.00

The noise is as low as 52dB during operation, the pure oil-free lubrication piston system ensures clean gas, the exhaust volume is 155L/min, the pressure is 8bar, the cylinder liner adopts Nano coating technology to improve the life, and the automatic design realizes energy saving and power saving.

$ 493.00

Adopting oil-free piston compression technology, Operating Pressure 8Bar, the exhaust volume reaches 350L/min, the noise is as low as 57 decibels, and it is equipped with a 50L air storage Tank and automatic pressure switch control to ensure a stable air supply.

$ 411.00

Noise at work is only 53dB, pure oil-free lubrication piston system to ensure clean gas, Power 1800W, exhaust 354L/min, automatic start-stop design energy saving and worry-free, cylinder liner using Nano coating technology to extend life.

$ 1348.00

Adopting pure oil-free piston design, equipped with a 4L gas storage Tank, the noise value is as low as 58dB, with an inner coating anti-rust treatment and a multi-stage filtrate system, the air pressure can be adjusted within the range of 5-8Bar, and the size is small and easy to install.

$ 590.00

Adopting oil-free piston compression technology, the exhaust pressure is 8 Bar, the exhaust volume is 1500L/min, and the noise is only 72dB. It is equipped with a 330L air storage Tank and an automatic pressure switch to ensure a stable air supply.

$ 2252.00

The pure oil-free design ensures that the gas is free of oil pollution. The Power 3000w provides strong power, with noise as low as 62dB. It is equipped with 4 pump heads to improve exhaust efficiency. The air pressure can be adjusted within the range of 5 to 8 Bar to meet different needs.

$ 2010.00

The oil-free design ensures that the gas is pure, the working noise is as low as 55 decibels, the exhaust pressure is 8 Bar, and the exhaust volume is 175L/min. It is equipped with a 25L gas storage Tank to ensure a stable gas supply.

$ 332.00

Using reciprocating design, Power 2400W, exhaust capacity 465L/min, working noise as low as 53dB, with multiple automatic protection systems, no need for oil lubrication, high gas cleanliness.

$ 1574.00

The noise at work is only 53dB, using Nano coating cylinder liner system, the exhaust capacity is 472L/min, with multiple automatic protection, no need for oil lubrication, clean gas and a lifespan of more than 20,000 hours.

$ 1719.00

Displacement 45L/min@0.7MPa, maximum pressure 0.8MPa, running noise 55dB, support custom pressure switch and optional oil-water separation, automatic drainage device to ensure stable air pressure and air mass.

$ 252.00

Articles

Application of Small Push-pull Force Gauge in Rapid Inspection of Adhesive Peel Strength for Mobile Phone Screens
This article introduces how to quickly test the peel strength of adhesive on phone screens using a small push-pull gauge.
Key Parameters for Air Compressor Selection and Analysis of Energy Efficiency Standards
The selection of an air compressor requires comprehensive consideration of discharge pressure, discharge volume, drive power, and the characteristics of the compressed medium to meet actual air usage requirements.
UV aging test chamber for evaluating the discoloration degree of resin weather resistance
This article introduces the method of using a UV aging test chamber to examine the degree of weather-induced discoloration in resins.
Humidity and Heat Test Chamber for Evaluating Coating Performance under High Temperature and High Humidity Conditions
This article introduces how a humidity and heat test chamber is used to evaluate the performance of coatings in high-temperature and high-humidity environments. Coatings are widely used in industries such as automotive and electronics, but they are prone to issues like reduced adhesion and blistering under actual high-temperature and high-humidity conditions.
Standards and Equipment Selection for Drop Testing in Mobile Phone Whole-Machine Reliability Testing
Drop test is an important method to test the durability of mobile phones, simulating accidental drops in daily life to examine the impact resistance of components such as the casing and screen. The test must follow international or industry standards, specifying conditions such as drop height and number of times.
Application of Colorimeter and Color Matching Box in Pigment Color Inspection
A colorimeter and a light booth are two primary tools in pigment color inspection. The colorimeter measures color through photoelectric principles, while the light booth provides a standardized light source environment for visual evaluation of color effects, metamerism, and other phenomena.
Analyzing Packaging Design Defects through Drop Tester Selection
This article discusses how the selection of a drop tester during the packaging design process can actually reveal many design issues early on. For example, determining parameters such as drop height, testing standards, and equipment dimensions during the selection process inherently tests the reasonableness of the design.
The rain test chamber simulates heavy rain environments to test the waterproof sealing performance of products.
A rain test chamber is a device that simulates rainfall environments, used to evaluate the waterproof performance of product casings or sealed components. It tests electronic products, automotive parts, and other items in accordance with relevant standards by controlling water flow, water pressure, and spray duration.
Application of Damp Heat Testing in the Environmental Adaptability Verification of Automotive Components
Humidity and heat testing is an accelerated test method that simulates high-temperature and high-humidity environments, used to evaluate the performance changes of automotive components under humid conditions. It primarily examines the insulation and corrosion resistance capabilities of electrical and electronic components, the aging resistance of interior materials, and the corrosion prevention effectiveness of exterior structural parts.