Measurement principle of resistance method, accuracy of +/- 1%, equipped with 610mm detachable long probe, can measure different depths of grain moisture, support voice broadcast and a variety of function settings, suitable for a variety of grain moisture detection.
Suitable for Coulometry moisture determination, containing 500mL KF-1A Reagent and 5 bottles of 5mL KF-1B Reagent, supporting a variety of Moisture Meters to meet the needs of laboratory moisture analysis.
Imported chips ensure stable performance, 1 second Fast Response to complete the detection, measurement range 10-85%, resolution of 0.1%, suitable for all kinds of fresh meat moisture determination.
Using halogen radiation heating technology, the moisture readability reaches 0.01%, the determination of Precision +/- 0.2%, and the test is completed quickly in a few minutes, with 8 kinds of paraMeter display functions.
Using Coulomb ElectRode technology, it can measure 10μg~ 20mg moisture, support 10mA to 100mA electrolysis current, no need to calibrate Reagent, with RS232 interface to connect to the printer.
Using halogen lamp heating source, temperature adjustment accuracy +/- 0.1 ℃, moisture readability 0.02%~ 0.1%, support timing automatic end measurement, ensure stable and efficient measurement.
Using temperature and humidity compensation technology to improve measurement accuracy, probe Sensor can penetrate deep into the material, Measurement range 0.8-80%, Response Time is only 1 second, with error fine-tuning and Interface customization function.
It is suitable for volumetric moisture determination, including 500mL of A and B Reagents, with a titration range of 3-5, and is used with ZDY-502/ZDY-504 instruments.
Using fixed K type stainless steel penetration type temperature sensor, Response Time 20 seconds, temperature range coverage -50.0 to 300 ℃, in line with IP65 waterproof standards, to ensure stable work in harsh environments.
Measurement range 0-99.9%, Response Time 1 second, Multi-gear selection and 50mm scanning depth, suitable for on-site rapid moisture determination.
Fast heating with halogen lamp, temperature control accuracy +/- 0.1 ℃, moisture measurement range 0-100%, readability of 0.02% -0.1%, support 9 display paraMeters and RS232 communication interface to meet the needs of multi-sample testing.
Sharp probe measurement without leaving marks, measurement range 6%~ 90%, support wood moisture content and wood humidity equivalent value display, equipped with extended Probe and hammer ElectRode for different depth measurement.
Ring halogen lamp heating, 0.02% moisture readability, RT +~ 180 ℃ Temperature range, automatic measurement, Draft Shield design, pure stainless steel heating Chamber cover, 16 sets of Data storage.
Low-frequency signal penetration depth of 20mm, can simultaneously measure concrete carbide moisture content and plaster moisture content, built-in environment Sensor, support a variety of professional probe expansion measurement function.
Equipped with fixed K-type stainless steel penetration Probe, Response Time 20 seconds, IP65 waterproof standard, with CAL Check ™ calibrate inspection and battery error prevention system to ensure accurate and reliable measurement.
