Support IP5X and IP6X Protection Rating test, liner size 1000 × 2000 × 1000mm, talc consumption 2kg/m ³, with automatic alternating control function of dust blower and dust vibration.
Suitable for paper or Cardboard dust degree determination, in line with national standards, the effective area of the table is 0.0625 square Meters and can be 360 ° swirl/spin, and the standard dust map area is 0.05~ 5.0mm ².
Equipped with a 0.0625 m2 effective area workbench and a standard dust map, it can be observed in 360-degree swirl/spin, supports 0.05~ 5.0mm ² dust area detection, and is easy to operate and meets a number of industry standards.
The use of 20W fluorescent light source, irradiation angle of 60 °, standard dust map area of 0.05~ 5.0mm ², the table can be 360 ° swirl/spin, to meet the needs of accurate paper dust detection.
Using 360 ° swirl/spin table and adjustable angle lighting system, the standard dust map covers a range of 0.05-5 mm ², and the effective detection area is 0.0625 m2, meeting the needs of accurate dust analysis.
Adopt imported PLC program control, support automatic alternation of dust blower and dust vibration, liner size 800 * 1000 * 1000mm, metal mesh diaMeter 50um, meet a variety of standard test requirements.
Compliant with ISO 8502-3 standard, equipped with illuminated magnifying glass and dust comparison display panel, can accurately assess the size and distribution of surface dust, support pass test and long-term recording.
Using a 360 ° swirl/spin table and a 20W fluorescent lamp with a 60 ° irradiation angle, the effective detection area is 0.0625 square Meters, which can be accurately analyzed against the 0.05~ 5.0mm ² standard dust map.
Adopting stainless steel air duct and centrifugal fan, the wind speed can be adjusted, the dust concentration is 2.0~ 4.0kg/m ³, and it has the function of vertical circulation air flow and dust drying to ensure the accuracy and uniform dispersion of test data.
Adopt stainless steel air duct and centrifugal fan, dust concentration 2.0~ 4.0kg/m ³, liner size 1000 * 1500 * 1000mm, support vertical circulation air flow and dust drying function, ensure accurate and reliable test data.
Equipped with 20W fluorescent lamp and 60 ° illumination angle, the effective area of the table is 0.0625 square Meters and can be 360 ° swirl/spin, supporting 0.05~ 5.0mm ² standard dust map detection, convenient and accurate operation.
Complies with ISO 8502-3 standard, can assess the size and size of surface dust, ensure cleaning before lame plating, improve coating adhesion, suitable for passing test and long-term recording.
Low-frequency signal penetration depth of 20mm, can simultaneously measure concrete carbide moisture content and plaster moisture content, built-in environment Sensor, support a variety of professional probe expansion measurement function.
Adopt stainless steel air duct and centrifugal fan, the wind speed is adjustable, the dust concentration is 2.0~ 4.0kg/m ³, support vertical circulation and dust drying, ensure test uniformity and data accuracy.
4 groups of samples can be tested at the same time, using PID precise temperature control technology, Temperature range from room temperature to 1000 ℃, with automatic calculation of carbon black content and ash content function, open lid structure heat dissipation effect is better.
