Mechanical Air Compressor

Mechanical air compressors use motors to drive pistons or screws to compress air, producing high-pressure gas. They are used to provide power for pneumatic equipment, spraying, and cleaning. In industrial settings, they supply air to tools and pneumatic valves.
Selection
Select the type based on the required pressure and flow rate. Piston types are suitable for intermittent use, while screw types are ideal for continuous operation. Consider energy efficiency and maintenance costs, and match them to the working environment and space constraints.

Terms

Standards

Instruments

Temperature range -40~ 130 ℃, Temperature Fluctuation ≤ +/- 0.5 ℃, using imported Air-Cooled fully enclosed refrigeration Compressor, with grounding protection, over-temperature protection, refrigerator overpressure overload protection and other functions.

$ 5187.00

Adopting a pure oil-free lubrication piston system, the noise value is only 59dB, and it is equipped with a 60L anti-rust treatment gas storage Tank. The air pressure can be adjusted within the range of 5-8Bar, and it has multiple automatic protection functions.

$ 1042.00

Air Compressor can reduce the working noise to about 43 decibels, the sound is extremely low, to meet the needs of various indoor environments for quiet operation.

$ 1655.00

Adopt piston structure, running Power 550W, noise value 58dB, with pure oil-free design, output gas clean, air pressure adjustable range 5-8Bar, automatic start-stop protection, service life of more than 15,000 hours.

$ 606.00

The noise at work is only 53dB, using oil-free lubrication piston system and Nano coating cylinder liner, the exhaust is clean, the service life is up to 20,000 hours, and it has multiple automatic protection functions, which is easy to operate automatically.

$ 1945.00

The noise is as low as 52dB during operation, the pure oil-free lubrication piston system ensures clean gas, the exhaust volume is 155L/min, the pressure is 8bar, the cylinder liner adopts Nano coating technology to improve the life, and the automatic design realizes energy saving and power saving.

$ 493.00

Adopting oil-free piston compression technology, Operating Pressure 8Bar, the exhaust volume reaches 350L/min, the noise is as low as 57 decibels, and it is equipped with a 50L air storage Tank and automatic pressure switch control to ensure a stable air supply.

$ 411.00

Noise at work is only 53dB, pure oil-free lubrication piston system to ensure clean gas, Power 1800W, exhaust 354L/min, automatic start-stop design energy saving and worry-free, cylinder liner using Nano coating technology to extend life.

$ 1348.00

Adopting pure oil-free piston design, equipped with a 4L gas storage Tank, the noise value is as low as 58dB, with an inner coating anti-rust treatment and a multi-stage filtrate system, the air pressure can be adjusted within the range of 5-8Bar, and the size is small and easy to install.

$ 590.00

Adopting oil-free piston compression technology, the exhaust pressure is 8 Bar, the exhaust volume is 1500L/min, and the noise is only 72dB. It is equipped with a 330L air storage Tank and an automatic pressure switch to ensure a stable air supply.

$ 2252.00

The pure oil-free design ensures that the gas is free of oil pollution. The Power 3000w provides strong power, with noise as low as 62dB. It is equipped with 4 pump heads to improve exhaust efficiency. The air pressure can be adjusted within the range of 5 to 8 Bar to meet different needs.

$ 2010.00

The oil-free design ensures that the gas is pure, the working noise is as low as 55 decibels, the exhaust pressure is 8 Bar, and the exhaust volume is 175L/min. It is equipped with a 25L gas storage Tank to ensure a stable gas supply.

$ 332.00

Using reciprocating design, Power 2400W, exhaust capacity 465L/min, working noise as low as 53dB, with multiple automatic protection systems, no need for oil lubrication, high gas cleanliness.

$ 1574.00

The noise at work is only 53dB, using Nano coating cylinder liner system, the exhaust capacity is 472L/min, with multiple automatic protection, no need for oil lubrication, clean gas and a lifespan of more than 20,000 hours.

$ 1719.00

Displacement 45L/min@0.7MPa, maximum pressure 0.8MPa, running noise 55dB, support custom pressure switch and optional oil-water separation, automatic drainage device to ensure stable air pressure and air mass.

$ 252.00

Articles

Application of Wet Film Wheel Gauge in Continuous Measurement of Wet Film Thickness for Large-Area Coatings
The wet film wheel gauge is a mechanical tool used to measure the thickness of wet coatings, operating based on the geometric relationship of three coaxial disks (two parallel outer wheels on the sides and an eccentric inner wheel in the middle).
Laboratory dispersers achieve efficient dispersion of paint pigments.
This article introduces how laboratory dispersers efficiently disperse paint pigments. They break up pigment agglomerates through mechanical actions such as shear force, involving three stages: wetting, dispersing, and stabilizing.
Mechanical thickness gauge for measuring film thickness uniformity.
The mechanical thickness gauge assesses the uniformity of film thickness through contact measurement. During measurement, the probe contacts the sample under standard pressure, converting displacement into a thickness reading.
Key Parameters for Air Compressor Selection and Analysis of Energy Efficiency Standards
The selection of an air compressor requires comprehensive consideration of discharge pressure, discharge volume, drive power, and the characteristics of the compressed medium to meet actual air usage requirements.
Sand Abrasion Tester for detecting the wear resistance of thermal spray coatings
This article introduces the method of using a sand falling tester to evaluate the wear resistance of thermal spray coatings. Thermal spray coatings are widely used in fields such as machinery and aviation, with wear resistance being a critical performance indicator.
Wet film thickness gauge measures the wet film thickness of varnish.
The wet film thickness gauge is a mechanical tool used to measure the thickness of liquid varnish coatings. It operates by rolling the gauge so that the tips of its teeth contact the substrate and leave marks. The thickness value is then obtained by the operator reading the scale of the first tooth that becomes coated with the varnish.
Solvent Rub Tester for Measuring the Solvent Resistance of Cured Coatings
This article introduces the method of testing the solvent resistance of cured colored paints using a solvent-resistant wiping instrument. The test evaluates coating performance by simulating solvent erosion and mechanical wiping, based on the number of wipes or surface changes.
Daily Maintenance and Common Troubleshooting Guide for Titrators in the Laboratory
This guide introduces the daily maintenance and common troubleshooting methods for titrators. Daily maintenance includes cleaning and sealing checks of burettes and liquid pathways, proper storage and performance verification of electrodes, as well as inspections of the instrument's external environment and mechanical components.
Internal Bond Strength Scott Tester for evaluating interlayer bonding force of paper.
This article introduces the method of evaluating the interlayer bonding strength of paper using a Scott tester. The interlayer bonding strength affects the printing and mechanical properties of paper. During testing, the instrument peels the paper vertically through an adhesive test head, records the energy required for separation, and calculates the internal bond strength.
The laboratory pulp wet disintegrator is used for pulp disintegration treatment.
The laboratory pulp wet disintegrator is a device used to simulate the industrial pulping process. It disperses pulp fibers into individual fibers or small fiber bundles through mechanical action, while simultaneously promoting fiber swelling and fibrillation, thereby providing standardized samples for subsequent performance evaluation.
Application of Valley Beater in Pulp Laboratory Beating
The Valley beater is a device used in laboratories to simulate industrial beating processes. It modifies the morphology of pulp fibers through mechanical action, thereby influencing paper properties. During operation, parameters such as beating pressure, pulp consistency, and beating time must be controlled, with the beating degree serving as a quantitative measure of the effect.
Industry Applications of Printing Ink Abrasion Resistance Testers
The printing ink abrasion resistance tester evaluates the wear resistance of ink coatings by simulating friction, with its core function being to quantify the durability of ink under mechanical action.
Ink rub resistance tester evaluates scratch resistance performance.
The ink rub resistance tester is a device used to evaluate the scratch resistance of ink on printed surfaces. It simulates mechanical actions such as friction and scratching to assess the adhesion strength and durability of the ink, and is widely applied in quality control and research and development in industries such as packaging and labeling.
Sieve Residue Analyzer and Sieve Analysis for Determining Pigment Particle Size Distribution
This article introduces how the sieve residue analyzer measures the particle size distribution of pigments through mechanical sieving.
The Effect of Different Substrate Treatment Processes on Coating Adhesion
This article primarily discusses that for a coating to adhere firmly, it's not just about the coating material itself, but more importantly, how the substrate is prepared. It analyzes several sources of coating adhesion, such as mechanical interlocking and chemical bonding.