Constant Temperature & Humidity Incubator

Overview Products Knowledge Standards Terms

The constant temperature and humidity chamber controls the internal temperature through heating and cooling systems, while regulating humidity via humidification and dehumidification devices, simulating stable environmental conditions. In paint testing, it is used to observe the weather resistance of samples; in the plastics industry, it checks the dimensional stability of materials. The incubator function is suitable for microbial cultivation and paper humidity adaptability testing.

Selection

When selecting, ensure the temperature range covers common needs from -40℃ to 150℃, with humidity control accuracy of ±2% meeting most experimental requirements. The inner chamber is made of corrosion-resistant stainless steel, and the observation window design facilitates monitoring. The compressor brand affects lifespan, while the microcomputer controller ensures stable parameter control. Match the workspace size according to the volume of the experimental samples and reserve interfaces for sensor calibration.

Terms

CO2 incubator

Mold incubator

Constant Temperature Incubator

Shaker

Low Temperature Incubator

Low Temperature Shaking Incubator

Light Incubator

Standards

Active GB/T 28851-2012

Specifications for refrigerated incubators

Active GB/T 32710.13-2016

Safety requirements for environmental testing and conditioning equipment—Part 13: Shakers, shaking water baths and shaking incubators

Active GB/T 32710.8-2016

Safety requirements for environmental testing and conditioning equipment—Part 8: Refrigerated incubators

Active GB/T 32710.9-2016

Safety requirements for environmental testing and conditioning equipment—Part 9: Electric heating incubators

Instruments

SANFA LHP-250EB Constant Temperature and Humidity Incubator Microcomputer Temperature and Humidity Control

Microcomputer temperature and humidity controller, Temperature Fluctuation +/- 0.5 ℃, humidity fluctuation +/- 5% RH, with over-temperature protection, independent temperature limit alarm system to ensure safe and stable operation of the experiment.

$ 6691.00

SANFA LHP-160 Constant Temperature and Humidity Incubator

Fluorine-free design, temperature uniformity +/- 1 ℃, humidity fluctuation +/- 5 %~ +/- 8% RH, with over-temperature, leakage, Sensor fault multiple alarm protection functions to ensure safe operation of the experiment.

$ 1229.00

SANFA LHP-300EL Constant Temperature and Humidity Incubator Microcomputer Temperature and Humidity Control, Environmentally Friendly Refrigerant

Adopt microcomputer temperature and humidity controller, temperature uniformity +/- 1 ℃, humidity fluctuation +/- 5% RH, equipped with mirror stainless steel liner and observation window, support programmable control and multiple safety protection functions.

$ 4843.00

SANFA LHP-300 Constant Temperature and Humidity Incubator Microcomputer Control Precise Temperature and Humidity

Fluorine-free design, temperature uniformity +/- 1 ℃, humidity fluctuation +/- 5 %~ +/- 8% RH, with multiple protection functions such as over-temperature and leakage, to ensure the safety and reliability of the experiment.

$ 1752.00

SANFA LHP-300E Constant Temperature and Humidity Incubator 300L Volume Temperature and Humidity Control

300L high-capacity design, temperature uniformity up to +/- 1 ° C, humidity fluctuation of +/- 5% RH, equipped with intelligent Touchscreen controller and ultrasonic humidifier, supports programmable control and a variety of safety protection functions.

$ 2355.00

SANFA LHP-250E Constant Temperature and Humidity Incubator 250L volume, small fluctuation of temperature and humidity

Volume 250L, Temperature Fluctuation +/- 0.5 ℃, Humidity Fluctuation +/- 5% RH, Fluorine-free design, mirror stainless steel liner is easy to clean and supports programmable control.

$ 2065.00

SANFA LHP-160EL Constant Temperature and Humidity Incubator Precise Temperature and Humidity Control, Environmentally Friendly Refrigerant

Environmental friendly refrigerant design, Temperature Uniformity +/- 1 ℃, humidity fluctuation +/- 5% RH, equipped with intelligent Touchscreen controller and multiple safety protection system to ensure stable and reliable experimental environment.

$ 3436.00

SANFA LHP-300EA Constant Temperature and Humidity Incubator Mirror Stainless Steel liner Temperature and Humidity Control

Mirror stainless steel liner is easy to clean, temperature uniformity +/- 1 ℃, humidity fluctuation +/- 5% RH, with over-temperature protection and intelligent controller to ensure safe and reliable experiments.

$ 5897.00

SANFA LHP-250EL Constant Temperature and Humidity Incubator

Environmentally friendly refrigerant design, Temperature Uniformity +/- 1 ° C, Humidity Fluctuation +/- 5% RH, equipped with intelligent Touchscreen controller and ultrasonic humidifier, supports programmable control and a variety of safety protection functions.

$ 4133.00

SANFA LHP-160E Constant Temperature and Humidity Incubator Touchscreen Controller

Equipped with intelligent Touchscreen controller and ultrasonic humidifier, Temperature Fluctuation +/- 0.5 ℃, Humidity Fluctuation +/- 5% RH, supports programmable control and a variety of safety protection functions, suitable for accurate environment simulation.

$ 1716.00

SANFA LHP-250EA Constant Temperature and Humidity Incubator Environment friendly refrigerant Humidity fluctuation +/- 5% RH

Using environmentally friendly refrigerant, Temperature Uniformity +/- 1 ℃, humidity fluctuation +/- 5% RH, equipped with intelligent Touchscreen controller and ultrasonic humidifier, supports programmable control and remote monitoring interface to ensure stable and reliable experimental environment.

$ 5529.00

SANFA LHP-160EA Constant Temperature and Humidity Incubator Precise Temperature and Humidity Control, Environmentally Friendly Refrigerant

Using environmentally friendly refrigerant design, temperature range -20~ 85 ℃, humidity fluctuation +/- 5% RH, with over-temperature protection and water shortage alarm function, to ensure the safe and stable operation of the experiment.

$ 4041.00

SANFA LHP-160EB Constant Temperature and Humidity Incubator

The fluorine-free design has low energy consumption, temperature uniformity of +/- 1 ° C and humidity fluctuation of +/- 5% RH, and is equipped with observation windows and lighting for easy monitoring. It supports programmable control and a variety of safety protection functions to ensure the stability and reliability of the experiment.

$ 5692.00

SANFA LHP-500EL Constant Temperature and Humidity Incubator High Accuracy Temperature and Humidity Control Environmentally Friendly Refrigerant

Adopted fluorine-free environmentally friendly refrigeration design, temperature uniformity +/- 1 ° C, humidity fluctuation +/- 5% RH, equipped with intelligent Touchscreen controller and ultrasonic humidifier, supports programmable control and a variety of safety protection functions.

$ 6110.00

SANFA LHP-400E Constant Temperature and Humidity Incubator Environment friendly refrigerant, humidity fluctuation +/- 5% RH

The equipment uses environmentally friendly refrigerant, Temperature Uniformity up to +/- 1 ℃, humidity fluctuation control at +/- 5% RH, equipped with intelligent Touchscreen and a variety of safety protection functions to ensure stable and reliable experiments.

$ 2763.00

Articles

Incubator Selection: Applicability of Temperature Control Range and Function Configuration

This article mainly introduces the compatibility between temperature control range and functional configuration that need to be considered when selecting an incubator.

Constant Temperature and Humidity Chamber Testing for Environmental Adaptability of Hot Melt Adhesive

This article introduces the method of testing the environmental adaptability of hot melt adhesive using a constant temperature and humidity chamber. The performance of hot melt adhesive is easily affected by temperature and humidity, and the purpose of the test is to evaluate its stability under different climatic conditions.

Constant Temperature and Humidity Chamber Testing for Ink Environmental Adaptability

This article introduces the method of testing the environmental adaptability of ink using a constant temperature and humidity chamber. Ink is prone to issues such as adhesion, discoloration, or reduced adhesion when exposed to changes in temperature and humidity.

The difference between thermal shock test chambers and constant temperature and humidity chambers

This article compares the differences between thermal shock test chambers and constant temperature and humidity chambers in terms of working principles, key performance, and applications.

Application of Constant Temperature and Humidity Chambers in the Electronics Industry

A constant temperature and humidity chamber is a device capable of precisely controlling temperature and humidity, used to simulate various environmental conditions that electronic products may encounter. In the electronics industry, it is primarily employed to test the reliability of components, finished products, and processes, such as evaluating material aging or performance changes through high-temperature and high-humidity tests.

Technical Selection and Application of Constant Temperature and Humidity Chambers

This article primarily discusses how to select and use a constant temperature and humidity chamber. It is mainly used to test the performance of materials and products under varying temperature and humidity conditions.