Two-stage pump structure is equipped with PTFE material pump head, strong corrosion resistance, maximum Flow rate 125L/min, Ultimate vacuum degree 15-20mbar, no pollution and maintenance, low noise and low temperature rise.
PTFE material, strong corrosion resistance, Maximum Flow rate 20L/min, Ultimate vacuum degree 15~ 20mbar, no pollution maintenance, low noise stable operation.
Using PTFE pump head material and coating diaphragm, suitable for strong corrosive gases, pumping speed 20L/min, Ultimate vacuum degree 3~ 8mbar, with pressure relief and cleaning functions, good air tightness and noise less than 58dB.
Using Three-Box independent temperature control design, each layer can operate independently without interfering with each other, Vacuum Level up to 133Pa, equipped with stainless steel studio and double-decked tempered Glass door, temperature control accuracy +/- 1 ℃.
The integrated pump body structure is adopted, and the forced oil pump lubrication is controlled. The ultimate pressure can reach 0.005mbar, the noise is as low as 58dB, and the parts are few and easy to maintain.
Using PTFE pump head and diaphragm material, resistant to strong corrosive gases. Pumping speed 60L/min, Ultimate vacuum degree 3-8mbar, with pressure relief and cleaning functions, good air tightness, operating noise less than 58dB.
The built-in vacuum pump realizes 0~ -80kPa Vacuum Level, the fully transparent vacuum Chamber can hold 12 samples, the program control supports 80 sets of paraMeter storage, and the vacuum cycle operation is automatically completed.
Using oil-free vacuum pump to achieve pollution-free work, with three-speed Vacuum Level conversion and 0.01s high resolution, intelligent pneumatic pressure to ensure Test accuracy and efficiency.
Vacuum chuck area of 300 * 400mm, equipped with 150W vacuum pump, aperture 0.8mm to ensure uniform adsorption, improve Spreader accuracy and Stability.
Using PTFE pump head material and PTFE coating diaphragm, suitable for strong corrosive gases and steam, pumping speed up to 40L/min, Ultimate vacuum degree 3~ 8mbar, with pressure relief and cleaning functions, noise is less than 58dB.
The integrated pump body structure is adopted, and the oil pump is forced to lubricate and control. The ultimate pressure is as low as 0.005mbar, the noise is only 58dB, and the parts are few and easy to maintain.
Using PTFE pump head and composite diaphragm, strong corrosion resistance, maximum Flow rate 35L/min, Ultimate vacuum degree 15-20mbar, no pollution and maintenance, low noise operation stability.
Circular rotation synergistic vortex flow, completely discharged bubbles; American technology ST vacuum pump noise low Vacuum Level high; 8 groups of 5-stage formula can be memorized; Touchscreen easy to operate; Safety protection complete.
Adopt oil pump forced oil inlet device, can operate continuously under 1.33 × 10 ³ Pa intake pressure, gas distribution ballast to prevent pump oil mixing, pumping speed 2L/S, Ultimate vacuum degree up to 0.006mbar, support a variety of interface conversion.
The rectangular stainless steel studio improves space utilization, each floor can be independently controlled and vacuumed, Vacuum Level up to 133Pa, equipped with double-decked tempered Glass doors for easy observation, optional program control to ensure stoving conformity.
