The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
It can prepare a wet film thickness of 13.7 microns, with a wire-wound design providing stable coating performance. The 9.52 mm diaMeter ensures easy operation, making it suitable for various paint application scenarios.
Frequency of 710 vibrations per minute, mixing in 30 seconds; can handle 0.5 to 20 liters of barrel paint, equipped with safety interlock and height adjustment functions, quiet operation and easy loading.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0-10.5 mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Using standard sand free fall brushing layer, straight grinding to expose 4mm substrate; can quantify the abrasion per unit thickness of the paint layer of sand volume, the inner diaMeter of the catheter 19mm, sample holder 45 degrees angle fixed.
Using 1mm diaMeter hemispherical scribe and 30mm/s traverse speed, test coating scratch resistance, load range of 50~ 2000g, automatic identification of scratch points, suitable for a variety of metallic coatings evaluation.
Adopt clamshell type Blade Coating head design, easy to clean; Spreader accuracy up to +/- 0.003mm, film thickness control precision; coating speed stepless speed regulation, application length can be adjusted freely, suitable for High Accuracy Laboratory Moulding needs.
With bar and drawdown blade two coating methods, Spreader thickness range 0~ 10mm, coating speed 5~ 200mm/s, support stepless speed and automatic feeding customization function.
Adjustable Blade Coating device to achieve 0.005-3mm thickness control, equipped with 200 ℃ heating roller and 1 Meter drying tunnel, support 1-10m/min continuous coating speed, with automatic correction function to ensure material alignment.
With bar and drawdown blade dual Spreader function, coating speed 1-300mm/s stepless speed regulation, Spreader accuracy of +/- 0.003mm, clamshell drawdown blade design for easy cleaning, servo motor drive to ensure smooth operation.
Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
Adopt all directions swing vibration mode to ensure that the paint is fully mixed, Vibration Frequency 550 times/min, equipped with 0-15 minute timing function, suitable for 80-240mm barrel height range.
Using nylon mesh and weight combination test, equipped with 200g to 1000g multi-specification weight, can accurately detect the surface imprint condition after coating drying, in line with international standards.
