Adopt 2-in-1 composite structure, equipped with waterproof plug-in, Measurement range 0-14pH, Operating temperature 5-60 ℃, suitable for routine sample testing.
Using aviation plug connection design, a host can match 9 kinds of Probe, with real-time value, MAX Maximum, MIN Minimum, average and other statistical functions, can save 9 sets of measurement data, 10 minutes automatic shutdown to extend battery life.
Measurement range of 1~ 2 × 10, using BNC plug design, matching pH and ion Meter, easy operation and fast Response, suitable for accurate Ion concentration detection.
Magnetic surface temperature measurement Probe through strong magnetic adsorption on the workpiece, small volume and light mass, Sensor and magnet insulation to ensure measurement accuracy, the highest temperature 480 ℃, especially suitable for circular workpiece surface.
Built-in Probe design, surface temperature Measurement range -40~ 80 ℃, air temperature accuracy +/- 0.5 ℃, Humidity range 0~ 100% RH, providing stable and reliable dew point monitoring.
Using split design, the probe and the host are connected by aviation plug, equipped with digital dual coil probe technology, Measurement accuracy can reach +/- 6HL, support a variety of Hardness standard automatic conversion, with 360 ° direction automatic compensation function.
Stainless steel enclosure guarantees durability, built-in 10KΩ temperature sensor Response fast, Measurement range 0-110 ℃, Compact design for plug-in installation, Ensure Reliability of temperature measurement.
The ring 6mm Probe design ensures good contact with the workpiece surface, the Teflon jacket is easy to clean and flexible and durable, the maximum temperature resistance is 300 ° C, and the lightweight shape avoids affecting the measurement accuracy.
Using 5MHZ Frequency and 10mm diaMeter Probe design, Measurement range 1.2-230 mm, the minimum pipe diaMeter can be measured Φ 20mm × 3mm, suitable for thickness detection in room temperature environment.
Measurement range 0.05-200 μ S/cm, Glass shell structure, three-core aviation plug connection, suitable for supporting the use of a variety of Conductivity Meters.
Measurement range 2000 to 200000 μS/cm, Glass shell design corrosion resistance, three-core air plug connection stability, suitable for accurate detection of high conductivity solution.
Measurement range of 0-2μS/cm, three-core aviation plug design ensures stable connection, suitable for accurate detection of low conductivity environment.
Split Probe interchangeable, high wear resistant carbide Probe service life of more than 500,000 times. Measurement accuracy of +/- (2% + 1μm), can accurately measure platings within 10 microns, and has a variety of calibrating and statistical functions.
With a speed range of 5 to 60 times/minute and 0 to 5cm Travel adjustment, it supports 0 to 99999999 counts and has a delay function. The structure is stable and suitable for connector durability testing.
Stainless steel shell adapts to complex environment, built-in 10KΩ Sensor Response, Measurement range 0-110 ℃, compact design for easy plug-in installation, support BNC interface for easy connection.
