Using 2268 +/- 7g standard brush parts, sanding speed 50cpm, automatic counting function to ensure test Repeatability, linear reciprocating motion simulates actual sanding conditions.
Easy to use magnetic suction Cup loading and unloading, sanding times 0~ 9999 two-way count, friction load 570 +/- 20g, additional weight adjustment load, suitable for undercoating and putty anti-sanding performance test.
With 0~ 135cpm friction speed range and 155mm Test Travel, using two-way counting system, can be configured with additional weight adjustment load, suitable for a variety of sample size sanding resistance test.
Adopt 37 +/- 2cpm friction speed, 300mm sanding Travel, 1000g standard load, automatic counting to set value stop, Repeatability is excellent.
Rotation speed 0-3000rpm, fineness of grinding can reach 10um or less, double-decked chill down jacket is used to control temperature rise less than 10 ℃, electric lifting operation is convenient, zirconia bead grinding medium to achieve efficient dispersion and ground synchronization.
Friction speed 0~ 135cpm, Test Travel 155mm, round-trip count 0~ 9999, suitable for accurate determination of sanding performance of undercoat and putty.
Adopt electric lifting system and frequency conversion speed regulation technology, Speed range 60~ 6900rpm, Power 1100W, equipped with dispersed impeller and sand grinding blades, can adapt to different impeller diaMeters, support chilling down water circulation temperature control.
Adopt double grinding head linear friction mode, load 570 +/- 20g adjustable, working plate Rotation speed 0~ 135rpm, magnetic chuck design makes sample loading and unloading convenient, the counter directly reads the number of sanding.
Electric lifting design to achieve dispersed ground synchronization, maximum Rotation speed 3000rpm, fineness of grinding up to 10um or less, configuration double-decked chill down jacket temperature rise less than 10º, zirconia bead medium to ensure efficient grinding.
The use of diamond sanding needles can flatten the surface of the grinding wheel, improve the utilization rate of abrasive wheels, and is equipped with a water supply system to support wet grinding and dry grinding. The size of abrasive wheels is about 250 × 30 × 32mm, and the Rotation speed is 1400rpm.
Rotation speed of 10000rpm is achieved by using 750W three-phase asynchronous motor, and the electric lifting platform supports 300mm Travel, which can handle 10L materials and work continuously for a long time.
Adopt frequency conversion electromechanical to achieve 0-7500rpm stepless speed regulation, equipped with electric lifting system to precisely control 160mm Travel, suitable for 0-3L material handling and low operating noise.
Using diamond sanding needle to smooth the surface of abrasive wheels, abrasive wheels stepless speed range of 500~ 1450rpm, equipped with stainless steel settling filtrate drawer to prevent clogging, wet grinding dry grinding can be applied.
The equipment adopts electric lifting and frequency conversion speed regulation, Rotation speed 0-3000 rpm, equipped with double-decked chilled down jacket and zirconia bead grinding medium to achieve efficient wet dispersion grinding, small temperature rise and easy operation.
Using electric lifting platform and three-phase asynchronous motor, the speed range is 0~ 2880rpm, the maximum processing viscosity is 30000cp, the operation is stable and the noise is small, it can operate for a long time, the dispersion disc is resistant to corrosion and easy to disassemble.
