Easy to use magnetic suction Cup loading and unloading, sanding times 0~ 9999 two-way count, friction load 570 +/- 20g, additional weight adjustment load, suitable for undercoating and putty anti-sanding performance test.
Friction speed 0~ 135cpm, Test Travel 155mm, round-trip count 0~ 9999, suitable for accurate determination of sanding performance of undercoat and putty.
Using 2268 +/- 7g standard brush parts, sanding speed 50cpm, automatic counting function to ensure test Repeatability, linear reciprocating motion simulates actual sanding conditions.
Adopt 37 +/- 2cpm friction speed, 300mm sanding Travel, 1000g standard load, automatic counting to set value stop, Repeatability is excellent.
With 0~ 135cpm friction speed range and 155mm Test Travel, using two-way counting system, can be configured with additional weight adjustment load, suitable for a variety of sample size sanding resistance test.
Adopt double grinding head linear friction mode, load 570 +/- 20g adjustable, working plate Rotation speed 0~ 135rpm, magnetic chuck design makes sample loading and unloading convenient, the counter directly reads the number of sanding.
Adopting stepless speed regulation technology, the friction speed range is 0~ 135cpm, the test Travel 155mm, the number of times can be set and automatically counted to evaluate the sanding performance of undercoated putty.
High Accuracy stepper motor, speed range 0-135 times/min, test stroke 155mm, equipped with manual suction Cup and a variety of weights, can be freely set the number of times 0-9999.
The use of diamond sanding needles can flatten the surface of the grinding wheel, improve the utilization rate of abrasive wheels, and is equipped with a water supply system to support wet grinding and dry grinding. The size of abrasive wheels is about 250 × 30 × 32mm, and the Rotation speed is 1400rpm.
Using diamond sanding needle to smooth the surface of abrasive wheels, abrasive wheels stepless speed range of 500~ 1450rpm, equipped with stainless steel settling filtrate drawer to prevent clogging, wet grinding dry grinding can be applied.
The equipment can detect the crazing or peeling of the putty film after bending, equipped with R25 and R50 support film specifications, shaft Rod size is 50mm and 100mm in diaMeter, suitable for 0.2-0. 3mm thick tinplate plate.
The motor-driven edge rises at a rate of 3mm/min to generate and control crazing expansion, which can detect the crazing ability of putty against substrates, with a maximum lift of 20mm, suitable for standard frame 200 × 150mm test plates.
Measurement accuracy 0.02mm, can control the slow expansion of crazing, test putty layer anti-substrate crazing ability.
The bending diaMeter of putty film cracking peeling is tested by bending test plate, and the shaft Rod size is 50mm and 100mm. It is suitable for 0.2-0 mm thick tinplate substrate, and the operation is simple and reliable.
Using pure mechanical design, the coating performance is measured by conical mandrel bending test plate, the test plate size is 100mm × 180mm, the thickness is less than or equal to 0.8mm, and the operation is simple and reliable.
