It can simultaneously test infrared, ultraviolet and visible light transmittance, and support the evaluation of total solar energy barrier rate. Using point array color screen visual display, the fuselage is lightweight and portable, with real-time dynamic Adjustment, Measurement accuracy is better than +/- 2%.
Measurement accuracy better than +/- 2% with high definition color screen progress bar, data locking and real-time dynamic Adjustment.
Simultaneous measurement of infrared, ultraviolet blocking rate and visible light transmittance, resolution up to 0.1%, accuracy better than +/- 2%. Using high definition color screen progress bar visual display, with data locking and real-time dynamic Adjustment to ensure accurate measurement.
Split design with super magnetic automatic suction, can be directly tested on the installed film Glass, using 1400nm Infrared source and 365nm UV light source, measurement accuracy of +/- 2%, with laser alignment function to ensure measurement accuracy.
Glass transmittance measurement is facilitated by split dual-machine design, integrated UV-IR-VIS 3-in-1 test function, equipped with laser alignment to ensure measurement accuracy +/- 2%, and supports built-in lithium battery power supply.
150W Philips infrared lamp, peak wavelength 950nm, temperature measurement accuracy +/- 0.5 ° C, insulation accuracy +/- 2%, can quickly compare the insulation performance of different materials, the test time is only 1 minute.
Measurable six paraMeters including UV barrier rate, visible light transmittance, infrared 950nm, 1400nm, Full IR and SHGC, using parallel light design, test accuracy +/- 2%, suitable for large Film thickness Glass, with real-time dynamic self-calibrating function.
Using 300W solar bulbs and hot air circulation heating, Temperature range RT +~ 120 ℃, can accurately control the test conditions, determination of material under light yellowing resistance performance, suitable for a variety of shoe material testing.
The integrating sphere principle is used to achieve full luminous flux reception, the maximum measurement thickness is 55mm, and the open measurement area is equipped to adapt to any size sample. Standard light sources and compensation methods are supported to ensure data accuracy.
With double Tank grinding ability, vibration speed 60-1800rpm, discharge particle size 5~ 10μm, support low temperature treatment of heat sensitive materials and low liquid nitrogen consumption, can handle more than 10 samples at a time.
Using 60-1800rpm vibration speed, the discharge particle size can reach 5~ 10μm, support dry grinding, wet grinding and low temperature grinding, suitable for heat-sensitive materials and minimal liquid nitrogen consumption, can handle more than 10 samples at a time.
With 60-1800R/min vibration speed and 1-30Hz Frequency range, support dry grinding, wet grinding and low temperature grinding, can handle feed ≤ 8mm sample to 5~ 10μm particle size, suitable for thermal materials and low liquid nitrogen consumption.
Parallel light path design can measure 100mm thickness material, accuracy +/- 1%, resolution of 0.001%, support field and fixed station two Measurement mode, suitable for a variety of Optical inspection material detection.
Support three kinds of solution mixed coating, the maximum coating diaMeter is 18mm, the substrate capacity is 36 positions, and the 150W ultrasonic nozzle is used to treat the viscosity < 30cps solution, which can be spray cracked in a controlled vacuum atmosphere.
Simultaneous measurement of UV radiation intensity and barrier rate, Light spectrum Response 260-380nm, power range 0-40000uW/cm ², automatic conversion barrier rate and direct display, Portable design is easy to use.
