The use of diamond sanding needles can flatten the surface of the grinding wheel, improve the utilization rate of abrasive wheels, and is equipped with a water supply system to support wet grinding and dry grinding. The size of abrasive wheels is about 250 × 30 × 32mm, and the Rotation speed is 1400rpm.
Folding angle 0 °~ 142 ° stepless adjustable, folding speed 10~ 2000cpm, spring tension 4.91~ 14.72N, with a variety of folding mouth gap distance selection, support real-time data display and thermal print output.
The high toughness knife body enhances the use strength, the log handle feels comfortable to hold, the tail is integrated with the function of opening the bottle cap and is equipped with a hanging hole, and the total length of the knife is 370mm and the length is 250mm.
It has an adjustable folding speed of 20-200 times/minute, supports 4.9N to 14.7N tension adjustment, and adopts color touch screen control to accurately measure the number of folding times of the material under 135 ° folding.
Adopt double grinding head linear friction mode, load 570 +/- 20g adjustable, working plate Rotation speed 0~ 135rpm, magnetic chuck design makes sample loading and unloading convenient, the counter directly reads the number of sanding.
Using 2268 +/- 7g standard brush parts, sanding speed 50cpm, automatic counting function to ensure test Repeatability, linear reciprocating motion simulates actual sanding conditions.
Equipped with 6 sets of fixtures to achieve simultaneous testing of multiple samples, the maximum folding angle is 90 degrees, the folding speed is 100 +/- 3cpm, and the material durability and checking development are evaluated by continuous expansion and bending.
Double Tank grinding design, vibration speed 60-1800rpm, discharge particle size up to 5~ 10μm, support dry grinding, wet grinding and low temperature grinding, suitable for heat sensitive materials and minimal liquid nitrogen consumption.
Film thickness can be measured below 1.25mm sheet material folding performance, folding angle 135 ° +/- 2 °, folding speed 175 +/- 10cpm, with intelligent judgment and statistical printing function.
Equipment with 12 sets of fixtures, bending angle 22.5 °, can be 100 +/- 5cpm folding test, suitable for upper, clothing, bags and other thin material folding endurance evaluation.
Rotation speed 2800RPM, eccentric spherical shaft design and TPU wear-resistant table, support point and continuous blending mode, small size and low noise, suitable for liquid, liquid-solid and powder rapid and uniform mixing.
The double Tank design is used to achieve high-throughput grinding, the vibration speed is adjustable from 60 to 1800rpm, and the discharge particle size is 5 to 10 μm. It supports dry grinding, wet grinding and low temperature grinding, and effectively protects the molecular structure of heat-sensitive materials.
Using large-screen touch screen operation, intelligent control of grinding time and speed, grinding results are highly repeatability. The dual-Tank design supports high-throughput processing, and the discharge particle size can reach 5~ 10 μm. It is suitable for heat-sensitive materials and consumes very little liquid nitrogen.
With double Tank grinding and 1-30Hz vibration Frequency adjustment, support low temperature grinding protection heat sensitive material, discharge particle size up to 5~ 10μm, can process more than 10 samples at a time and grinding time only 1-3 minutes.
Using double Tank grinding design, vibration speed 60-1800rpm, discharge particle size up to 5~ 10μm, support low temperature grinding protection of heat sensitive materials, a processing of more than 10 samples, grinding time only 1-3 minutes.
