Fully enclosed metal Furnace body to enhance Baseline Stability, with imported alloy Sensor to enhance corrosion resistance; Temperature range covering room temperature to 600 ℃, support 0.1~ 100 ℃/min program temperature control, with 0.001 ℃ resolution and Automatic calibration function.
Heating power 1000W, Temperature range adjustable, working size 15 * 15cm, Power conversion temperature can be adjusted according to needs to meet different heating needs.
Using 45 degree angle fixed test, equipped with adjustable load (500g/250g) and adjustable traverse speed (5mm/s), electric control running smooth noise is small, Test Travel can reach 90mm, the platform is suitable for a variety of samples.
Adopt electric push Rod to drive Spreader movement, adjustable speed range of 2-200mm/s, temperature accuracy +/- 3 ℃, support Vacuum chuck and electric heating function, improve Spreader uniformity and operation convenience.
With a 45 ° test angle and an adjustable speed of 5mm/sec, equipped with a 500g weight and a standard pencil set, stable and low-noise electric control is achieved through a stepper motor.
Enclosed aluminum silicate Furnace and nickel-chromium-aluminum alloy heating wire are used to reduce volatile gas corrosion; three-sided heating method combined with PID control, Temperature Fluctuation +/- 5%, accurate and stable temperature control.
Maximum temperature 1000 ℃, temperature control accuracy 1 ℃, using high aluminum liner and upper and lower left and right 4-sided heating design, with 30 program settings and over-temperature protection function, uniform temperature in the Furnace.
The maximum temperature is 1200 ° C, the Furnace volume is 16L, and the 30-segment programmable control is used to achieve precise temperature control. The safety switch of the Furnace door and the design of the corrosion resistance Furnace improve the operation safety and durability.
Maximum temperature up to 1200 ℃, temperature control accuracy 1 ℃, with 30 program settings and over-temperature protection function, full range programmable automatic control of heating thermostatic, Furnace size 400 * 250 * 160mm.
With 30-stage programmable control function, the maximum temperature is 1000 ℃, the Furnace volume is 2L, the refractory brick Furnace and stainless steel material are used, and the heat loss is small and the Temperature uniformity is good.
Pneumatic fixture is used to protect the pRoduct from deformation, and a protective box is equipped to prevent the specimen from rushing out. The drop height is adjustable from 300-1500mm, the test load is 2kg, and the height is displayed by High Accuracy steel ruler and digital display Meter.
The highest temperature up to 1000 ℃, Furnace volume 16L, the use of refractory brick Furnace and wirecoil for heater heating, with automatic safety switch and overheating and overpressure protection, Furnace door sealing good heat loss is small.
The highest temperature is 1400 ℃, the Furnace volume is 4.5L, and the aluminum oxide fiber Furnace and silicon carbon Rod heating elements are used to support the inert gas environment and ensure the uniform and stable sintering of the material.
Operating temperature up to 1700 ℃, Furnace volume 80L, aluminum oxide fiber Furnace and double chill down system, support inert and reducing atmosphere environment material sintering treatment.
The maximum temperature can reach 1200 ℃, Furnace volume 7L, using microcomputer PID controller precise temperature control, refractory brick Furnace durable, Furnace door sealing design to enhance Temperature uniformity, safe and simple operation.
