Adjustable scraper Spreader mode, Spreader accuracy of +/- 0.02mm, equipped with air-cooled water-cooled double chill down system, Spreader rate of 5-25m/min, Heating Temperature range to 200 ℃ +/- 3 ℃.
Water-Cooled cooling system, LED UV Illuminant with 395 nm wavelength and 700 W Power, Light intensity 0-100% adjustable, conveying speed 0-6 m/min adjustable, suitable for rapid curing of various UV materials.
The Water-Cooled cooling system is adopted to ensure stable operation. The 395nm wavelength LED Illuminant provides uniform illumination. The light Power reaches 12W/cm ² and the illumination distance is 30-50mm. It has over-temperature protection and Power 0-100% adjustment function.
Using 395nm wavelength LED Illuminant, Optical Power up to 12W/cm ², equipped with Water-Cooled system to ensure stable operation, adjustable irradiation distance of 10-50mm, support 0-100% stepless dimming, suitable for a variety of material curing needs.
Temperature range -20~ 150 ℃, studio volume 1000L, Temperature Uniformity +/- 1.0 ℃, using wind, water-cooled dual-stage Compressor and high temperature insulation material, support high temperature and low temperature Reliability test.
Temperature range -40~ 130 ℃, Temperature Fluctuation ≤ +/- 0.5 ℃, using imported Air-Cooled fully enclosed refrigeration Compressor, with grounding protection, over-temperature protection, refrigerator overpressure overload protection and other functions.
Temperature range -60~ 150 ℃, Temperature Uniformity +/- 1.0 ℃, equipped with wind and water-cooled dual-stage Compressor and multiple protection devices to ensure test Stability and safety.
Temperature range -40 ℃~ + 150 ℃, conversion time ≤ 10 seconds, using water-cooled refrigeration system and PID control, support 120 sets of program capacity, with USB data storage and multiple security protection, suitable for harsh environment testing.
The hydraulic pump provides 150bar pressure to tighten the sample; the double-ended die sleeve can be operated independently of any specification; the hot and cold separation design ensures safety and stability; the water chilling down system accelerates the sample preparation speed.
The hydraulic pump provides 16Mpa pressure to ensure the sample is tight, and the water chilling down system is equipped to speed up the sample preparation. The unique swirl/spin lock design simplifies the operation, and the program control realizes the heating to 180 ° C and the adjustable holding time, and the performance is stable and reliable.
Adopt triple-channel thermal insulation structure to realize cold and hot air circuit switching, temperature recovery time within 5 minutes, Impact time up to 9999 minutes, with 96 test specifications independently set and automatic defrosting function.
Adopt triple-channel thermal insulation structure to realize cold and hot air circuit switching, temperature recovery time within 5 minutes, Impact time can reach 9999 minutes. With 96 test specification settings and P.I.D automatic calculation control to ensure Test accuracy.
Temperature range -40 ° C to + 150 ° C, Impact conversion time ≤ 10 seconds, supports 120 sets of program capacity, uses water-cooled refrigeration system and PID control to ensure Temperature Fluctuation +/- 0.5 ° C and Uniformity +/- 2.0 ° C.
Temperature range -40 ℃ to + 150 ℃, the temperature conversion time is only 10 seconds, using PID full digital automatic Control system, can quickly detect the material in the extremely high temperature and low temperature continuous environment resistance and thermal expansion and contraction changes.
The three-box structure design is adopted, the test sample is still in the test area, the temperature recovery time is ≤ 5min, and the conversion time is ≤ 10s. It has three test functions of high temperature, low temperature and Thermal Shock, meeting a variety of standard requirements.
