It can measure the surface roughness of the groove with a width of more than 3mm and a groove depth of less than 10mm, and can also measure the plane and cylinder. It can be stably detected with a special measurement platform.
It can measure the groove surface roughness with a groove width greater than 2mm and a groove depth less than 3mm, and supports both flat and cylindrical measurement. It can be accurately detected with a special measurement platform.
Measurement range 0~ 1000 microns, accuracy +/- 3%, built-in V-groove Probe for rough surface and cylindrical workpiece measurement, can be used without calibrating, equipped with Ruby Probe to ensure durability.
The multi-groove coating scraper can scrape 10 wet-films of different thicknesses at one time, the thickness difference of adjacent films is 25um, and the wide film thickness range of 50-675um is supported. It is convenient to visually observe the sag situation by placing the test plate vertically.
It can measure the groove surface roughness with a groove width greater than 3mm and a groove depth less than 10mm, and is compatible with flat and cylindrical measurement. It can be used with the measurement platform to achieve accurate detection.
Provide an additional one-year warranty period, which is applicable to Coating thickness Gauge pRoducts. It needs to be purchased simultaneously when purchasing the equipment and is not sold separately.
Dedicated to Coating thickness Gauge calibrating, ensure accurate thickness measurement, suitable for F type equipment, improve Reliability.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
Using a formed pRoduction process to form a continuous groove, wet film thickness 5μm, diaMeter 10mm, not easy to clog and easy to clean, fine workmanship.
The formed process is used to form a continuous groove to control the wet film thickness, the wet film thickness is 5 μm, the application width is 250mm, and the workmanship is fine and the environmental protection Encasement.
With 5 pairs of grooves designed, the groove depth covers the range of 100 to 1000 μm, which can accurately test the surface Smoothness of paints Dry-Film and reduce unevenness such as brush marks and spray points.
The leveling is evaluated by film fringe close test, the groove depth is 250-4000 μm, and the 5 pairs of grooves are designed to facilitate the observation of fringe changes, which is suitable for Dry-Film surface Smoothness detection.
Made of stainless steel, the groove width is 12mm, Graduation 1.5μm, with a single groove design, suitable for fineness measurement in the range of 0-15 microns.
Measurement accuracy of +/- 2 microns, wear resistance and corrosion resistance, handheld operation, suitable for rapid detection of various material fineness.
The continuous groove design prevents clogging by impurities, with a wet film thickness of 84.6 μm and a diaMeter of 6.35 mm, making it suitable for high-viscosity coatings and easy to clean and maintain.
