The equipment is designed with double rollers, with a test load of 5kg, a drop height of 500 + 1000mm, and a rotation speed of 5-20 times/minute to meet the needs of continuous rotary drop testing.
The equipment can perform continuous rotary drop test, drop height up to 1000mm, Test speed 5-20 times/min, suitable for Reliability verification of small electronic pRoducts.
The single-arm double-column structure is used to realize the free drop of the face corner, and the height tracking system is equipped to make the drop height error not exceed 2%. The buffer device improves the service life and safety of the equipment.
The single-arm double-column structure is equipped with an electric lifting device, with a drop height range of 300-1500mm, a test load of 0-80kg, and a buffer device to improve service life and stability. The height error does not exceed 2%.
Adopting double column guide and hydraulic buffer system, the drop height range can be set from 0 to 2000mm, the maximum load is 300kg, and it supports all-round drop testing of edge angles and has upper and lower induction protection devices.
Single arm double column structure equipped with hydraulic buffer device, drop height 400-1500mm adjustable and accuracy of +/- 10mm, support face angle full angle drop test and have electric reset function, maximum load weight 100kg to ensure test Stability.
Adopting a single-arm double-column structure, equipped with a hydraulic buffer device to improve service life and stability, with a drop height range of 400 to 1500mm, it can test up to 80kg specimens, meeting a variety of standard testing requirements.
The single-arm double-column structure is equipped with a hydraulic buffer device, with a drop height error of no more than +/- 10mm and an angle error of less than 5 °. It supports seven-speed height adjustment and face corner drop mode, with a maximum load of 65kg and an electric lifting function.
Can test 300~ 1500mm drop height, bearing 100kg load, double wing structure to ensure that the drop plane error is less than 1 °, suitable for all kinds of Encasement box testing.
With Vacuum chuck function, drop height 300~ 2000mm adjustable, support 0 °, 45 °, 90 ° multi-angle drop, with Acceleration and speed measurement, can accurately control the impact site.
The drop height is 300~ 1500mm, the test load is 100Kg, the maximum size of the specimen is 1000 * 800 * 1000mm, the baseplate size is 1700 * 1200mm, and the plane error is less than 1 degree.
It can simultaneously test two devices, with a maximum load of 2kg and a drop height of 60 to 150mm. It uses pneumatic components and PLC control to achieve high-speed consistent testing, and has automatic stop and count functions.
Pneumatic fixture is used to protect the pRoduct from deformation, and a protective box is equipped to prevent the specimen from rushing out. The drop height is adjustable from 300-1500mm, the test load is 2kg, and the height is displayed by High Accuracy steel ruler and digital display Meter.
Support 50-300mm height adjustable, double station test 2 devices at the same time, Test speed 10-30 times/minute, use pneumatic control to ensure test conformity, reach the set number of automatic stop.
The instrument employs the principle of heavy hammer impact, with a drop height adjustable within the range of 1000 ± 5 mm and a hammer mass of 500 ± 1 grams, designed for the precise determination of a material's puncture resistance.
