The three-point contact structure is used to ensure stable sliding, the test angle is fixed at 45 °, and the 500/750/1000g adjustable load is equipped. The coating Hardness is accurately judged by the scratch depth of different Hardness pencils.
The three-point contact design ensures that the pencil and the test surface always maintain a 45 ° angle, the standard 6B-6H pencil covers the complete Hardness range, the mechanical structure is easy and reliable to operate, and it is suitable for a variety of coating hardness testing needs.
The pencil scratch method is used to test film Hardness, and the three-point contact design always guarantees a 45 ° angle, which meets the GB6379 standard and is suitable for film Hardness detection in laboratories and construction sites.
The three-point contact design ensures a 45-degree test angle and provides a 500/750/1000g three-speed load for rapid determination of coating Hardness and is suitable for laboratory and field environments.
Manual measurement of film Hardness, test angle 45 °, load 1 +/- 0.05kg, three-point contact with the measured surface, suitable for inspection in any direction.
Manual measurement of paint film Hardness, load 1000g, test angle 45 °, three-point contact with the tested surface design, suitable for inspection in any direction.
Equipped with British original ElectRode, supports 2 to 5 point calibrating and manual temperature compensation, Measurement accuracy +/- 1% FS, optional various Hardness units, automatic end point locking to ensure stable reading.
Using two-wheel and refill three-point contact structure, refill and test surface to maintain an angle of 45 degrees, equipped with 1000g weight, by pushing the Tester to accurately determine the film Hardness value, easy and reliable operation.
Using two-wheel three-point contact structure, refill and test surface to maintain an angle of 45 degrees, equipped with 500g weight load, by pushing the Tester can accurately determine the film Hardness value.
Using two-wheel and refill three-point contact design, refill and test surface to maintain an angle of 45 degrees, equipped with 750g weight load, by pushing the Tester can accurately determine the film Hardness value, easy and reliable operation.
Three-point contact design ensures 45 ° stability testing angle, equipped with 6B-6H pencil and 500g to 1000g adjustable load, manual push to achieve accurate film Hardness identification.
Mechanical three-point contact structure, maintaining a 45-degree angle, providing 500g/750g/1000g load options, manually testing the film Hardness by pushing the trolley, suitable for a variety of surfaces.
Baseline and droplet contours are automatically recognized by machine vision, and contact angles are calculated based on Laplace equation quadratic Linear dispersion fitting. Measurement range is 0-180 °, accuracy is 0.1 °, and dynamic contact angle measurement and surface energy calculation are supported.
Manual measurement of paint film Hardness, load 500g, test angle 45 °, can be inspected in any direction, three points contact with the measured surface.
Using the original British Sensor, support 2 to 5 point calibrated and 8 kinds of concentration Unit switch, with automatic temperature compensation and end point locking function, Measurement accuracy +/- 1% F. S, built-in 500 sets of Data storage and comply with GLP specifications.
